I've got the bug... any sub $100 Mods/Upgrades Recommended?
#23
Registered User
*I think you can run any plugs except for the Iridium if you're increasing the gap -- if/when doing the Supra AFM, some have installed the Supra ignitor (leaving the stock one in place as backup), and increased spark plug gap to supra specs.
As for wires, your original ?, there are three options, but if going w/ Supra or other aftermarket ignitor, you want the last one:
-NGK wires
-OEM Denso and/or Dealership Wires
-Magnecor 8mm wires (claims to fit factory wire holders)
(some run accel rather than Magnecor, but accel only sells universal fit wire sets...)
As for wires, your original ?, there are three options, but if going w/ Supra or other aftermarket ignitor, you want the last one:
-NGK wires
-OEM Denso and/or Dealership Wires
-Magnecor 8mm wires (claims to fit factory wire holders)
(some run accel rather than Magnecor, but accel only sells universal fit wire sets...)
Last edited by RSR; 09-18-2013 at 11:04 AM.
#26
Registered User
#27
Registered User
Thread Starter
Not fair! Nice deal though, did you pull that from a junkyard or was someone really just selling headers for $60?
#28
Registered User
Well the story goes like this:::
I have some friends who work at a local Toyota dealership. A 91 ex cab 4x4 truck came in that the owner wanted some maintenance done and for the truck to be returned to stock because it was to loud.,... so my friend pulled off the headers that he got to keep and called me up and offered them to me for 60 bucks since I have the only 3vze motor in the group. I said "Hell Ya!"
The moral of the story is get some friends who work at local dealership.....
I have some friends who work at a local Toyota dealership. A 91 ex cab 4x4 truck came in that the owner wanted some maintenance done and for the truck to be returned to stock because it was to loud.,... so my friend pulled off the headers that he got to keep and called me up and offered them to me for 60 bucks since I have the only 3vze motor in the group. I said "Hell Ya!"
The moral of the story is get some friends who work at local dealership.....
#29
Registered User
Join Date: Apr 2011
Location: Tucson, AZ
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Gamefreakgc, what Magnaflow are you running on your truck? I'm looking into doing the cat back on my daughter's truck soon. I want to get that done before doing any of the other mods such as the AFM.
#30
What would I stash it for? Headers?
Also, I ran across an ECT mod on our forums, anyone done this? I realize it's not going to post huge gains, but is simple enough.
http://www.midiwall.com/4Runner/ect.html
Also, I ran across an ECT mod on our forums, anyone done this? I realize it's not going to post huge gains, but is simple enough.
http://www.midiwall.com/4Runner/ect.html
#31
Registered User
Thread Starter
Seriously? Too loud? Now his truck is a slug... lol!
xtremewlr, I believe it's part #11225. Reason I say that is because I didn't put it on (I don't have a welder), the shop selected the right one. I'm 95% sure, it measures the same size and the same piping (there's only one I could find. http://www.magnaflow.com/02product/s...=main&id=11325
#33
Registered User
Well I took another long look at the headers. There is a hole in the collector at the flange. That would be why they were loud. A little welding and they will be good as new....
Thread
Thread Starter
Forum
Replies
Last Post
ashamsuddin
General Vehicle Related Topics (Non Year Related)
17
07-22-2024 03:59 AM
kawazx636
The Classifieds GraveYard
34
10-06-2021 03:03 PM
JookUpVandetti
86-95 Trucks & 4Runners
10
09-30-2015 08:58 AM