IFS camber issues
#21
Registered User
Thread Starter
Join Date: Oct 2008
Location: NH/NY/FL
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
after further investigation, the length between where the control arms mount in the front are 22 1/8th inchs, as are the rear. so thankfully the frame is not bent. BUT i did notice my bushings are showing wear.
i'm going to take it to toyota this saturday, and if i dont notice much improvement, i will try adjusting it myself next weekend. and order bushings as soon as funds allow.
thanks everyone for your input!
i'm going to take it to toyota this saturday, and if i dont notice much improvement, i will try adjusting it myself next weekend. and order bushings as soon as funds allow.
thanks everyone for your input!
#22
Registered User
Just a thought here, consider aligning it yourself first. If that doesn't work go to the dealer.
Being able to compare what you did with their specs will teach you how to do it yourself in the future.
Frank
Being able to compare what you did with their specs will teach you how to do it yourself in the future.
Frank
#23
Registered User
Thread Starter
Join Date: Oct 2008
Location: NH/NY/FL
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
i would, but i'm taking a 2.5 hr trip tommorow so i do not have time this weekend
as for next weekend i am free to work on it
Last edited by sa51; 11-28-2008 at 03:27 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
04-11-2024 04:39 PM
delmert
84-85 Trucks & 4Runners
11
09-30-2015 04:34 PM
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
2
08-11-2015 01:56 AM
scottyg486
Offroad Tech
3
07-19-2015 05:34 PM