Ifs bad sound passenger side
#22
Registered User
Thread Starter
didnt get to check it as i had to finish the bumper, then helped get my friends toyota running. lubed all arm bushings, still squeeky. had my uncle jump on my bumer to hear the squeeks and hwere they were coming from, sprayed passenger side sway bar bushing and the squeek instantly stopped. maybe the sound is from my sway bar bushing being worn out?
#28
Registered User
Thread Starter
But the issue is that I'm trying to figure out this noise. I just don't want to have my truck drive sketchy on my 20 min freeway commute to and from work.
#31
Registered User
Join Date: Nov 2007
Location: Dillsburg, PA
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
Believe it or not, if you're looking to eventually SAS, removing the sway bar will help you change your driving habits for when there are leafs under the front end. Obviously, with a SAS, there is no sway bar. When I rebuilt my truck, I never installed the sway bar. Knowing it isn't there will allow you to adjust the way to drive into turns. Realize that the truck was also lifted 4" right off the bat, so, I was already driving cautiously when taking turns. If you drive sensibly, you will be fine. Driving on the freeway without the sway bar isn't an issue, the truck will not wander without it. It only comes into play when turning, especially when taking an exit, or driving on a winding back road.
#34
Registered User
Thread Starter
Ok, dropped the sway bar and the noise did not stop. My woman days it feels like it's at a spot in the floor board where the body mount and cross member are. I tightened the body mount which wasn't loose and the crossber seems fine and I don't think that could be the problem. I'm running out of ideas and just want my toyota to
Be solid again. Help!
Be solid again. Help!
Thread
Thread Starter
Forum
Replies
Last Post
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
08-30-2016 01:03 PM