i need a frame
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: milwaukee, WI baby muddin in the streets!!
Posts: 2,801
Likes: 0
Received 1 Like
on
1 Post
i need a frame
i looked and nothing im in very bad need of a 1987 runner frame should be good no cracks or anything like that rust is ok i guess as ill be wire wheeling it and under coating her i also need a 84 or solid axle frame for the same truck a runner i need them both asap so let me know what you all have and how much thanks alot guys oh and yeah im doing a sas but not the way you all think im stacking frames thats why i need both asap cause my frame is broke and cracked ask joes toy and ozziesironmanoffroad they will tell ya that i need a frame
#4
Registered User
I JUST saw one on Denver craigslist, let me see if I can find it again. I think it was an 87 pu frame but it shouldn't take much more than moving a couple body mounts to get a Runner body on it.
http://denver.craigslist.org/pts/628179379.html
$70. I'm not associated with this person in any way but thought I'd toss you the link. Not a bad deal I guess assuming it's not rusted through or bent.
Not sure how close it is to you, there are a LOT of Bear Creek's in the U.S. lol. Im guessing Nevada though from ozzies location (duh lol).
http://denver.craigslist.org/pts/628179379.html
$70. I'm not associated with this person in any way but thought I'd toss you the link. Not a bad deal I guess assuming it's not rusted through or bent.
Not sure how close it is to you, there are a LOT of Bear Creek's in the U.S. lol. Im guessing Nevada though from ozzies location (duh lol).
Last edited by Luvmeye22re; 04-02-2008 at 07:39 PM.
#6
Registered User
Ah who knows, there is a Bear Creek in the Suburbs outside Denver, there are a LOT of Bear Creeks lol. Wisconsin would be kind of a haul from Denver but $70 for a decent frame doesn't seem like too bad of a deal.
Trending Topics
#9
Registered User
Thread Starter
Join Date: Jan 2007
Location: milwaukee, WI baby muddin in the streets!!
Posts: 2,801
Likes: 0
Received 1 Like
on
1 Post
yeah im going to update that now so its not all like what the heck or where the hell is me kinda thing but thanks man im going to go and look at it and see what i can do t
#12
Registered User
Join Date: May 2006
Location: Virginia
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Its decent but Ive only had the truck for about 2 weeks so there might be some things hiding that I havnt seen yet. If you were serious I would strip it before you got here and make damn sure there was nothing wrong with it. I just thought I would throw it out there if you wanted to make a trip.
#13
Registered User
Join Date: Jun 2007
Location: Detroit, MI
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
I have an excellent frame im trying to sell from a 1990 4x4 ext cab pickup. I dont know if you can make it work or not. I'm just a little north of detroit. No cracks/rust. It was a stored winters rust free truck. If I cant sell it very soon, it's going to the scrapper.
#16
Registered User
Thread Starter
Join Date: Jan 2007
Location: milwaukee, WI baby muddin in the streets!!
Posts: 2,801
Likes: 0
Received 1 Like
on
1 Post
ok when you stack frames it gives you the body lift and the suspension lift all at the same time and this way i can have a very very very very strong frame you cut the body mounts off the bottom one and cut the suspension mounts off the top one and weld them together and bolt them too that way the dmv cant say anything lol and this way i can have my solid axle or sas with out the sas or im just going to look for a 84 runner frame and get the lift kit but i think i wanna stack them so there very strong but if im broke and dont wanna do the work im going to look for a 84 frame and bolt my body and motor on her with my 84 axles i love the solid axle but dont like the sas look so yeah and thats what us boys do out here in the sticks to easy cheap lift kit