Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

I just acquired a 5M-GE

Thread Tools
 
Search this Thread
 
Old 02-01-2009, 09:16 PM
  #41  
Registered User
 
874runnersr5's Avatar
 
Join Date: May 2008
Location: Calgary, AB Canaduh
Posts: 3,948
Received 11 Likes on 7 Posts
yeah, my buddy told me that there "were 4" first gen 4runners on friday..
i had to work sat, but my dad and i went first thing today and nothing...
they still that this pickup that i took the red door from, and somehow it gained another door? lol.. im still trying to figure out that one.
but yeah, i destroyed that pickup lol.
Old 02-05-2009, 07:48 PM
  #42  
Contributing Member
 
bigtrucknwheels's Avatar
 
Join Date: Jun 2007
Location: Where it always works if you work it, in Sunny Selinsgrove, PA
Posts: 2,336
Likes: 0
Received 2 Likes on 2 Posts
so what are you planning to do now?
Old 02-05-2009, 09:02 PM
  #43  
Registered User
 
7m4x4dude's Avatar
 
Join Date: Jan 2009
Posts: 320
Received 0 Likes on 0 Posts
yeah....what are you going to do ?
Old 02-05-2009, 09:17 PM
  #44  
Registered User
 
annoyingrob's Avatar
 
Join Date: Aug 2008
Location: Calgary, AB
Posts: 1,068
Likes: 0
Received 4 Likes on 4 Posts
Originally Posted by 874runnersr5
yeah, my buddy told me that there "were 4" first gen 4runners on friday..
i had to work sat, but my dad and i went first thing today and nothing...
they still that this pickup that i took the red door from, and somehow it gained another door? lol.. im still trying to figure out that one.
but yeah, i destroyed that pickup lol.
There were two trucks, and two 88+ 4runners when I went.

Got some parts, still need others. There were two MKIII Turbo Supras in there too. One of them still had the R154 in it. It's gone now though.
Old 02-06-2009, 12:18 PM
  #45  
Contributing Member
 
4runner4ever's Avatar
 
Join Date: May 2003
Location: the Netherlands
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
I have a custom bellhouse left over to do this swap bolt on. And all other parts. I think I even have the engine brackets.
I replaced my 3VZE with a 7M-GE and after that (almost) died I did a new swap with a 2JZ.
It uses the 7M-GE (or 5M) flywheel and clutch, mated to the R151F from the 3VZE.
I need some parts for my runner like 93 grille and lights, so if you'r interested in swap of some sorts send me a pm..

Previous swap:

Old 02-06-2009, 06:36 PM
  #46  
Registered User
 
annoyingrob's Avatar
 
Join Date: Aug 2008
Location: Calgary, AB
Posts: 1,068
Likes: 0
Received 4 Likes on 4 Posts
Why not get a 1JZ bellhousing, and bolt the R151 right to the 2JZ?

Btw, awesome motor!
Old 02-06-2009, 10:12 PM
  #47  
Contributing Member
 
4runner4ever's Avatar
 
Join Date: May 2003
Location: the Netherlands
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Couldn't find one so build another custom one.
Driving it for some 2 years now.
BTW, the 2JZ THAT is an awesome motor. Makes the 7M sound and feel like it's from Fred Flintstone's car....

Old 02-07-2009, 08:34 AM
  #48  
Contributing Member
 
bigtrucknwheels's Avatar
 
Join Date: Jun 2007
Location: Where it always works if you work it, in Sunny Selinsgrove, PA
Posts: 2,336
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by 4runner4ever
Couldn't find one so build another custom one.
Driving it for some 2 years now.
BTW, the 2JZ THAT is an awesome motor. Makes the 7M sound and feel like it's from Fred Flintstone's car....

Nice! But the 7M makes the 3VZ/22RE seem like something cavemen developed. I am going the 7M route, as cost is going to be a factor in my build.

Oh, and I will buy your bellhousing for the right price, PM me and maybe we can work something out...
Old 02-14-2009, 10:07 PM
  #49  
Registered User
Thread Starter
 
forbiddenera's Avatar
 
Join Date: Jul 2008
Location: Calgary, AB
Posts: 313
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 7m4x4dude
yeah....what are you going to do ?
I figured this thread would've died.

So, my hecticness and bad luck haven't stopped yet. As I said, my parts car got towed and the previous owner gave me the wrong VIN# so I couldn't get it out of impound, fortunately I'm not responsible for the impound fees either now, so unfortunately, that's a write off.

Beyond that, I swapped the radiator out of that car into my Supra, it worked fine for a few days and then started leaking. I used some aluminum sealant and the leak stopped nearly instantly and seemed fine, a few days later, I was driving around with apparently no coolant, and the temperature gauge did not creep above operating temps, but some damage was done. Blew the head gasket.

So now my Supra is out of commission completely as well.

Now you guys were asking what I plan to do, well, right now I'm looking at acquiring a 7mgte to swap into the Supra, then I'll pull the 5mge out of the Supra, rebuild and turbo it and swap it into the 4runner.

Wish me luck.
Old 02-14-2009, 10:07 PM
  #50  
Registered User
Thread Starter
 
forbiddenera's Avatar
 
Join Date: Jul 2008
Location: Calgary, AB
Posts: 313
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 4runner4ever
Couldn't find one so build another custom one.
Driving it for some 2 years now.
BTW, the 2JZ THAT is an awesome motor. Makes the 7M sound and feel like it's from Fred Flintstone's car....

beautiful. I wish I could afford one.
Old 02-14-2009, 10:08 PM
  #51  
Registered User
Thread Starter
 
forbiddenera's Avatar
 
Join Date: Jul 2008
Location: Calgary, AB
Posts: 313
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 4runner4ever
I have a custom bellhouse left over to do this swap bolt on. And all other parts. I think I even have the engine brackets.
I replaced my 3VZE with a 7M-GE and after that (almost) died I did a new swap with a 2JZ.
It uses the 7M-GE (or 5M) flywheel and clutch, mated to the R151F from the 3VZE.
I need some parts for my runner like 93 grille and lights, so if you'r interested in swap of some sorts send me a pm..

Previous swap:

If you have a bellhousing that'll get my 5m onto my transmission than I'm very interested. PM'd.
Old 02-15-2009, 07:30 PM
  #52  
Registered User
 
annoyingrob's Avatar
 
Join Date: Aug 2008
Location: Calgary, AB
Posts: 1,068
Likes: 0
Received 4 Likes on 4 Posts
Originally Posted by 4runner4ever
Couldn't find one so build another custom one.
Driving it for some 2 years now.
BTW, the 2JZ THAT is an awesome motor. Makes the 7M sound and feel like it's from Fred Flintstone's car....

Oooh, engine bay shots! My turbo is bigger

Old 02-20-2009, 07:38 PM
  #53  
Registered User
Thread Starter
 
forbiddenera's Avatar
 
Join Date: Jul 2008
Location: Calgary, AB
Posts: 313
Likes: 0
Received 0 Likes on 0 Posts
So I just bought another Toyota.

1982 2wd pickup
Old 12-12-2009, 06:28 AM
  #54  
Registered User
Thread Starter
 
forbiddenera's Avatar
 
Join Date: Jul 2008
Location: Calgary, AB
Posts: 313
Likes: 0
Received 0 Likes on 0 Posts
Pick up is long gone, new donor car is in shop.. Time to try and get 'er to start up.. Sparking but not getting fuel.
Old 12-12-2009, 08:43 AM
  #55  
Registered User
 
874runnersr5's Avatar
 
Join Date: May 2008
Location: Calgary, AB Canaduh
Posts: 3,948
Received 11 Likes on 7 Posts
good news man
Old 12-15-2009, 12:05 PM
  #56  
Registered User
Thread Starter
 
forbiddenera's Avatar
 
Join Date: Jul 2008
Location: Calgary, AB
Posts: 313
Likes: 0
Received 0 Likes on 0 Posts
Got the donor to run, runs good. Gonna rebuild it anyway since I have the parts.
Old 01-23-2010, 09:59 PM
  #57  
Registered User
Thread Starter
 
forbiddenera's Avatar
 
Join Date: Jul 2008
Location: Calgary, AB
Posts: 313
Likes: 0
Received 0 Likes on 0 Posts
head is at the machine shop
gonna need to make motor mounts
Old 01-24-2010, 05:55 AM
  #58  
Contributing Member
 
bigtrucknwheels's Avatar
 
Join Date: Jun 2007
Location: Where it always works if you work it, in Sunny Selinsgrove, PA
Posts: 2,336
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by forbiddenera
head is at the machine shop
gonna need to make motor mounts
can't wait to see it in action haha
Old 01-29-2010, 05:46 PM
  #59  
Registered User
 
annoyingrob's Avatar
 
Join Date: Aug 2008
Location: Calgary, AB
Posts: 1,068
Likes: 0
Received 4 Likes on 4 Posts
Why not just buy my whole 7M-GTE and put that in instead
Old 01-31-2010, 06:09 PM
  #60  
Contributing Member
 
bigtrucknwheels's Avatar
 
Join Date: Jun 2007
Location: Where it always works if you work it, in Sunny Selinsgrove, PA
Posts: 2,336
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by annoyingrob
Why not just buy my whole 7M-GTE and put that in instead
how much?


Quick Reply: I just acquired a 5M-GE



All times are GMT -8. The time now is 12:01 PM.