hmmwv's cab swap
#1
Registered User
Thread Starter
Join Date: Sep 2006
Location: Good 'ole Georgia
Posts: 1,801
Likes: 0
Received 0 Likes
on
0 Posts
hmmwv's cab swap
As you all know, I rolled my truck and plan to replace my cab with the old 2wd's cab. This has already proved to be a pita, and has already challenged how little I know about these trucks. I don't know how I'll manage to do this, as I find it hard to even take the dash apart. Hopefully I'll find someone on here who will be willing to help me at least online.
First got it home:
That night got some of the interior out, fenders, doors, and windshied duct taped to keep it kind of in tact:
Then today didn't get to much at all before it started raining and had to stop. All work was done prepping the 2wd cab today:
How both sit after it started to rain:
First got it home:
That night got some of the interior out, fenders, doors, and windshied duct taped to keep it kind of in tact:
Then today didn't get to much at all before it started raining and had to stop. All work was done prepping the 2wd cab today:
How both sit after it started to rain:
#3
Contributing Member
Join Date: Dec 2005
Location: Bucklesberry, North Carolina
Posts: 1,167
Likes: 0
Received 2 Likes
on
2 Posts
Good luck with it man. BTW, I think that 2wd cab is gonna look sick on the 4wd. I love the paint on it!! That toyota devil horn sticker on the hood aint bad lookin either
#7
Registered User
Thread Starter
Join Date: Sep 2006
Location: Good 'ole Georgia
Posts: 1,801
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Registered User
Thread Starter
Join Date: Sep 2006
Location: Good 'ole Georgia
Posts: 1,801
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered User
Thread Starter
Join Date: Sep 2006
Location: Good 'ole Georgia
Posts: 1,801
Likes: 0
Received 0 Likes
on
0 Posts
One question, does anyone know if the mounting points of a 4runner body are the same as a pickups? If so, I would more than likely turn mine into a 4runner! That would be sweet!!!
#17
Registered User
Thread Starter
Join Date: Sep 2006
Location: Good 'ole Georgia
Posts: 1,801
Likes: 0
Received 0 Likes
on
0 Posts
I once again worked too late to get pictures up, but I did manage to get some of the wiring and dash out. Also drained and removed the radiator. So then a friend pulled the 2wd on stands so I could get to bleeding the brakes easier, and never got to it 'cause it got dark. So I'll probably do all that tomorrow.
#18
Registered User
Thread Starter
Join Date: Sep 2006
Location: Good 'ole Georgia
Posts: 1,801
Likes: 0
Received 0 Likes
on
0 Posts
If anyone has any front fenders in ga that they would like to donate or sell cheap, let me know. I will also be going up to new york to niagra falls here in a couple of days. If anyone has any parts they want to get rid of I might be interested.