Engine Break-In
#1
Registered User
Thread Starter
Join Date: Apr 2006
Location: Vancleave, Mississippi
Posts: 1,368
Likes: 0
Received 0 Likes
on
0 Posts
Engine Break-In
i'm getting close to having my newly remanufactured engine in my runner ..3vze by the way... what do you guys think the best way to break it in would be...the paper that came with it said keep idling to a minimum and change the oil after 500 miles and dont tow anything till then..but that is pretty vague, i would like some details from someone with expirence. thanks! and if i am back under the hood of that thing for anything other than an oil change in the next few years it will become the green smiley>>
#2
Contributing Member
Join Date: Dec 2005
Location: Houston (home), Atlanta (school), Cincinnati (work)
Posts: 2,226
Likes: 0
Received 0 Likes
on
0 Posts
ive always heard to keep your acceleration slow for the first 500 miles but this was also back in the day when engines needed a good breaking in...
#3
Contributing Member
#5
Contributing Member
Join Date: Dec 2005
Location: Houston (home), Atlanta (school), Cincinnati (work)
Posts: 2,226
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Avsfreak1234
I heard that you shouldnt get your RMPs up for a while. and with a new car dont go over 40mph for 500miles to break in the drivetrain.
#6
Contributing Member
iTrader: (1)
Join Date: Apr 2005
Location: Colorado
Posts: 4,683
Likes: 0
Received 0 Likes
on
0 Posts
Read this too: http://theoildrop.server101.com/ubb/...=011663#000001
Trending Topics
#8
I gave my Hybie I built for my 82', Hell the second I dropped it in, and she has some fookin nasty power for a 4 banger!!!
When I built it a few years back, DOA basically told me, to take it a little easy on it, not to do steady RPMs to long for the 1st hundred miles or so. But he also said, don't be affraid to open the engine up and let it know, what you built it for.
Till this day every now and then, I bank 6500-7000 R's in it... Doesn't burn a single lick of oil at all. In 3000 miles my dipstick will not change in level at all, and I have even have a slight oil leak in it. (rear of my valve cover leaks slightly)
When I built it a few years back, DOA basically told me, to take it a little easy on it, not to do steady RPMs to long for the 1st hundred miles or so. But he also said, don't be affraid to open the engine up and let it know, what you built it for.
Till this day every now and then, I bank 6500-7000 R's in it... Doesn't burn a single lick of oil at all. In 3000 miles my dipstick will not change in level at all, and I have even have a slight oil leak in it. (rear of my valve cover leaks slightly)
#11
Contributing Member
Join Date: Jul 2004
Location: Ft. Collins, Co
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Maybe not after reading this.
Makes sence!
Originally Posted by Elton
#12
Registered User
Join Date: Aug 2005
Location: Arlington, TX
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CoedNaked
If you go into your owners manual it has a section on engine break in, straight from Toyota themselves. I'd think they know their engines best.
#14
Registered User
once it hits operating temp, punch it.
drive like you will after its been broken it
i think break-in for anything other than 'brand new from the factory' will handle what you throw at it, after its warmed up
drive like you will after its been broken it
i think break-in for anything other than 'brand new from the factory' will handle what you throw at it, after its warmed up
#16
Registered User
Thread Starter
Join Date: Apr 2006
Location: Vancleave, Mississippi
Posts: 1,368
Likes: 0
Received 0 Likes
on
0 Posts
well it seems like the general consensus(if i spelled it right) is let it warm up and drive it hard...i'll probablly end up doin that next weekend when its running!
#17
Registered User
The biggest thing that needs breaking in is the cam. The recommendations I got (and followed with mine) was to add a can of GM's EOS to the oil before break-in. This keeps the cam from scuffing during break-in. Run the engine for the first 15 to 20 minutes at 2000 RPM. Then drive normally. Change oil at 500 miles.
#18
Registered User
Join Date: Aug 2005
Location: Jacksonville, FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by InternetRoadkill
The biggest thing that needs breaking in is the cam. The recommendations I got (and followed with mine) was to add a can of GM's EOS to the oil before break-in. This keeps the cam from scuffing during break-in. Run the engine for the first 15 to 20 minutes at 2000 RPM. Then drive normally. Change oil at 500 miles.
#19
Registered User
Join Date: Apr 2004
Location: Vancouver, British Columbia, Canada
Posts: 1,475
Likes: 0
Received 1 Like
on
1 Post
I thought I heard somewhere, from a fairly reliable source if I recall correctly, that Toyota engines are run for 3 minutes straight at 5000 RPM before Toyota will put them into any new Toyota vehicle.
#20
Registered User
yep, the only 2 things that you need to pay attention to on a break-in are the first and foremost, the cam, and then the piston rings.
break in the cam the way the manufacturer says, usually running at around 2000RPM for about 20 minutes immediately after you start the engine. to get the piston rings to seat(this is rather crucial, as you need them to seat quickly, if they don't, your engine will start burning oil prematurely and you won't get maximum power), take it out on a nice long road, and go through the gears. after you rev it up and shift, take your foot off the gas and engine brake. do this several times -- once the rings seat you'll feel an almost instant power increase. sometimes it takes a couple days of driving, but with the new moly rings out there it's usually pretty quick.
break in the cam the way the manufacturer says, usually running at around 2000RPM for about 20 minutes immediately after you start the engine. to get the piston rings to seat(this is rather crucial, as you need them to seat quickly, if they don't, your engine will start burning oil prematurely and you won't get maximum power), take it out on a nice long road, and go through the gears. after you rev it up and shift, take your foot off the gas and engine brake. do this several times -- once the rings seat you'll feel an almost instant power increase. sometimes it takes a couple days of driving, but with the new moly rings out there it's usually pretty quick.