Just Learning

I have both carb- holley off road stuff higher vent diff needles yayayay, also have the efi -- to me i like my carb but also the efi aint that bad either so all it boiles down to is what you want , also when if put on the off manifold it was not straight had on hard time with it, if i had to do it over i would stay with stock and use the a-dapter- kit(johnny cash)

superdave

It gave a qoute of $244 to ship to you with my guesses for weight and dimensions. Ill have to get more accurate numbers and report back. Im up for trading with ya man but I can get the parts cheaper than that locally. I bet that number is way off though

superdave

Anyone have an idea what all the FI stuff weighs?

yoterr

that might be a question that has never been asked b4 and i might take you up on that deal, i can get most of the stuff from your buddy and the stuff i specifically need ill just order, might be a while tho

superdave

I would think someone would know the weight, Im sure those parts are shipped all the time. Just let me know when your interested.

waskillywabbit

iTrader: (-1)

25 to 35 lbs my guess and under $50 to ship UPS in continental 48 would be my estimate.

superdave

Well thats alot better then I was thinking wabbit. Outsane let me know what you want to do.

waskillywabbit

iTrader: (-1)

I would put it in a rubber tub after your wrap it up in garbage bags or the gas smell etc will get it red flagged and they won't ship it.

Outsane

Well at forty pounds from Inverness florida 34453 to me San Diego 92109

I got an estimate of $40 at shipgooder.com

I have Carb cam too with the fuel pump lobe ( once I swap out the RV cam ) so you can use the new fuel pump I put on and not worry about an inline with a pressure reg and all that jazz..

superdave

when would you want to do this?

Outsane

i got a trip to big sur at the end of june, so right after that would be fine
i an send you the offy now if you want

superdave

Sounds good to me. I still need to pull my truck apart so I'll let you know when thats done and we can ship out some parts. If it would be more cost effective for you to ship everything at once we can just wait until after your trip if you prefer.

superdave

Also, which offy intake do you have? Stock carb, weber, or 4bbl? I am assuming its for the stock carb.

Outsane

yeah I have a stock carb.. and its a offy for a 22r, and I have the water plate too..

shipping all at once will save some dough

and I'll take the wiring even if its burned..

superdave

There are 3 offy intakes for the 22r. Yours mounts the stock carb?

Outsane

oh you know what I am not sure..

I have never tried.. I will get some pics of it..

the stock intake and carb is on my truck now..

superdave

Ok, I was just wondering. If it has a part # on it you can just give me that.

Outsane

its a dual port I will have to get the part number its in storage.

Outsane

I took a look at the offy.. and the number on the bottom is 6626..

I think a weber fits on it..