clutch won't release
#1
clutch won't release
Hey guys I've read similar post and took the advice given there but problem is still there my clutch won't release I have a new master slave rubber hose and hard lime ran almost a quart of fluid through it trying to get bled used asin parts I haven't took the clutch mounting plate out yet but looks like it's been welded before have adjustment rod adjusted as far as it can go has new shifter seat and socket but press clutch and won't go into gear
#6
Registered User
iTrader: (1)
You don`t need to pull the bracket unless you really want to.
Getting into position to remove the bracket just push the pedal with your hand easy to see the bracket flex if it is broken.
Have a helper push the clutch while watching to see if the clutch Fork is moving like it should.
Getting into position to remove the bracket just push the pedal with your hand easy to see the bracket flex if it is broken.
Have a helper push the clutch while watching to see if the clutch Fork is moving like it should.
Trending Topics
#11
Old clutch don't know how many miles are on it pedal is adjusted as far as I can go and still has to much free play I'm gonna pull the tranny in the next day or so I'm thinking the clutch is bad it's pretty much the only thing left but no money wasted everything I replaced needed it
#12
Next question how do I know what clutch to buy the truck is a 90 Idk what year the engine and trans are it's got a 22r in it 5spd 2wd
Last edited by cb'sYOYO; 02-23-2015 at 07:38 AM.
#13
Old clutch don't know how many miles are on it pedal is adjusted as far as I can go and still has to much free play I'm gonna pull the tranny in the next day or so I'm thinking the clutch is bad it's pretty much the only thing left but no money wasted everything I replaced needed it
#14
When yall are measuring free play are you measuring to the point that there is some resistance or to when you can feel the throw out bearing engage the clutch fingers
#17
Well pulled the trans out clutch was completely gone absolutely no friction material left the throw out bearing shot and pilot bearing also shot have the clutch kit ready to go in but the clutch fork pivot ball is also broke where can I get a new pivot ball I've not been able to find one on line
#19
#20
Well after driving for 6 hrs round trip to get the only pivot ball in the state of ky I'm about to go pit everything back together I'll let yall know how it works out