Can I get new seats from the dealer?
#2
Registered User
if brand new is what you want, contact any of the online toyota dealerships. theyre listed in the vendor section. it will cost ya, though!
you are better off looking on ebay, imho
bob
you are better off looking on ebay, imho
bob
#3
Registered User
Join Date: Apr 2004
Location: Vancouver, British Columbia, Canada
Posts: 1,475
Likes: 0
Received 1 Like
on
1 Post
I picked up some SR5 bucket seats and swapped them into my truck from a 92 SR5 Toyota pickup for $100 CDN funds each earlier this year. They were in really good shape and after a steam clean and some shampoo they are good as new. Just gotta keep an eye out at the local wreckers.
#4
Registered User
It's definitely best t take a trip to the junk yard to get new seats. Not only can you probably find stock yota seats in good condition, you might find a pair out of a completely different make and model that you like better.
Just look for something that sits about the same height off the floor as what you have. It's not hard to fab brackets to make them work.
Just look for something that sits about the same height off the floor as what you have. It's not hard to fab brackets to make them work.
Trending Topics
#8
x3 for the pnp. I found some nice 4Runner seats which they quoted me like $100 for the pair. But, I am poor and my bench seat has served me well so far...
Your not joking. I've heard of AFMs from the dealer going for around 1k. I'd bet a set of seats would cost a few thousand as well.
Originally Posted by X-AWDriver
I think a pair of seats from the dealer will cost in the neighborhood of $7000 and then maybe an arm and a leg.
#9
Guest
Join Date: Jun 2006
Location: Cal Poly Pomona or Redlands, CA
Posts: 1,273
Likes: 0
Received 0 Likes
on
0 Posts
well for a 2nd gen rear head rest, not the one that clicks and tilts forward, was 200. for one, in cloth! so based on that, 500 for each headrest, 2.5 grand per seat, 7k sounds about right...
at the stealership anyway...
at the stealership anyway...
#10
$7k for a pair? omfg. I was thinking $1k for a pair. I was way off. What about these seats from ebay:
http://cgi.ebay.com/ebaymotors/2x-LE...09881920QQrdZ1
Anybody have those in their truck?
http://cgi.ebay.com/ebaymotors/2x-LE...09881920QQrdZ1
Anybody have those in their truck?
#11
Contributing Member
Join Date: May 2006
Location: cookeville tn.
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
I hooked up with a dude here last month got a pair of 2004 TRD buckets had my fab shop weld two cross beams front and back. they are SWEET. 250$ for seats 50$ to fab shop.
#12
Registered User
Join Date: Jan 2006
Location: Kansas City
Posts: 669
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by crackerjack
I hooked up with a dude here last month got a pair of 2004 TRD buckets had my fab shop weld two cross beams front and back. they are SWEET. 250$ for seats 50$ to fab shop.
#13
Registered User
leather racing seats are stupid, not enough grip. I like the factory buckets (atleast i think thats what ive got). They're quite buckety, and keep you in place quite well.
#18
Registered User
Join Date: Aug 2005
Location: Springs, Colorado
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
I called the dealer for new door panels, and they wanted 400 bux for the stock sr5 door panels. i about shat myself found a yota only junker and became this guys friend, he took the door panel outta his son's project truck for 40 bux for me! lol This is after i tell him about the ones on ebay going for 209 plus shipping. I would find some outta a junked car or go get them reupholstered for cheap.
Last edited by Sonofmayhem; 07-25-2006 at 07:01 PM.