camo clad + bedliner
#1
Registered User
Thread Starter
Join Date: Feb 2008
Location: Spokane, Washington
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
camo clad + bedliner
so i wan't to camo clad my 4Runner and rino line the bottom body line. since you probably couldn't lay the vynil perfectly flush against the bed liner should i just lay the vynil down so the bed liner would over lap just a little bit.
anybody have any experience with the vynil graphics
anybody have any experience with the vynil graphics
#5
Contributing Member
then he would be telling a trade secret, lol... hey, if I printed money for a living, would you expect me to give you some?
lmao, just kiding man, but yeah, lend a hand man; I have no idea, never messed with the stuff, but I'd guess just line the bottom, then after that ly the vynil above that; neither will probably overlap the other very well
lmao, just kiding man, but yeah, lend a hand man; I have no idea, never messed with the stuff, but I'd guess just line the bottom, then after that ly the vynil above that; neither will probably overlap the other very well
Last edited by iamsuperbleeder; 05-22-2008 at 11:41 AM.
Trending Topics
#8
Registered User
Join Date: Mar 2008
Location: Temecula Valley, CA
Posts: 12,723
Likes: 0
Received 5 Likes
on
5 Posts
soapy water. that's the trade secret.
spray the surface with soapy water and that lets you move the decals around until they are in the proper position
then you squeegee the water out from under the decal
spray the surface with soapy water and that lets you move the decals around until they are in the proper position
then you squeegee the water out from under the decal
#9
Registered User
Join Date: Dec 2007
Location: Hazzard County, Georgia
Posts: 433
Likes: 0
Received 2 Likes
on
2 Posts
Depends on which you use. The brand i used steted do not use anything put it on dry. Read the label closley.The pieces overlap. Overlap so water will un over not under kinda like shingles. I did a jeep, i cant get the picture to work on here.I cant get the laptop to resize it.Also do the rhino lining first lay the vinyl and work your way up
#11
Registered User
Join Date: Mar 2008
Location: Temecula Valley, CA
Posts: 12,723
Likes: 0
Received 5 Likes
on
5 Posts
When I was dealing with die and laser cut and silk screened graphics a few years agp, all of my vendors used 3M products and the 'soapy water' thing was the manufacturer (3M) recommended way of positioning and fixing the product.
What's changed?
Last edited by abecedarian; 05-22-2008 at 02:42 PM.
#12
Registered User
Join Date: Jul 2007
Location: ATX/ Waco
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
The sign shop I worked for used 3M vinyl with soapy water too. What materials will be damaged by soapy water?
And to the OP, start in the middle of the piece and squeegee outward.
And to the OP, start in the middle of the piece and squeegee outward.
#16
Registered User
How much would it cost to get Camo clad installed on an 86 extended cab pickup. I see your In Lewiston, ID. My old man lives in Kamiah. Just curious on a price if I bought the Camo clad how much you'd charge to install it and how long is install time?
Thread
Thread Starter
Forum
Replies
Last Post
LosPatosDelSur
86-95 Trucks & 4Runners (Build-Up Section)
23
03-12-2021 03:08 AM