Bushing question
#1
Bushing question
I am going to be pulling and replacing the motor on my 87 2wd. I want to go thru the bushings and ball joints while the motor is out - I figure I won't ever have better access.
It seems clear that OEM style upper control arm bushings are being recommended because the poly's squeak up there but are quiet most everywhere else.
I see upper control arm bushings sold with the metal sleeves already on them.
My question: Is it easier to NOT reuse the old sleeves and just use new ones?
Wealth of knowledge here - thanks for any insight.
It seems clear that OEM style upper control arm bushings are being recommended because the poly's squeak up there but are quiet most everywhere else.
I see upper control arm bushings sold with the metal sleeves already on them.
My question: Is it easier to NOT reuse the old sleeves and just use new ones?
Wealth of knowledge here - thanks for any insight.
Thread
Thread Starter
Forum
Replies
Last Post
Steven.m.paulk
86-95 Trucks & 4Runners (Build-Up Section)
3
07-24-2015 01:44 PM