Bleeder-Dude's Official 22re Engine Rebuild Thread - TONS OF PICTURES!!!
#623
Bleeder if you still have your valve cover off you might want to look down and check to see if your top oil pump bolt is hitting your chain tensioner. Mine was touching just enough to keep it from working. Also this bolt needs thread sealer. I know someone has been in the motor I'm working on and I think they might have switched the bolt or replaced it. I thought I was the first one to take my motor apart untill I found a helicoil in the block for one of the head bolts.
Last edited by 854x4; 07-08-2009 at 08:36 PM.
#624
Contributing Member
Thread Starter
Bleeder if you still have your valve cover off you might want to look down and check to see if your top oil pump bolt is hitting your chain tensioner. Mine was touching just enough to keep it from working. I know someone has been in the motor I'm working on and I think they might have switched the bolt or replaced it. I thought I was the first one to take my motor apart untill I found a helicoil in the block for one of the head bolts.
thanks for the tip!
#625
X2 on sweet how 2 vid.
I took some pics of my MC 1200 lb and went to upload them and the damn cord is missing & sd port on my comp crapped out.
...so my clutch has 4 springs & is a SECO # 48626. The Clutch cover is however an Aisin and the # engraved on it is CTX-062.
hope that helps, i'll post pics if i ever find the cord...
I took some pics of my MC 1200 lb and went to upload them and the damn cord is missing & sd port on my comp crapped out.
...so my clutch has 4 springs & is a SECO # 48626. The Clutch cover is however an Aisin and the # engraved on it is CTX-062.
hope that helps, i'll post pics if i ever find the cord...
#627
Contributing Member
iTrader: (3)
Here: https://www.yotatech.com/forums/f116.../#post51178998
#632
Contributing Member
Thread Starter
Well, I got in touch with MC today; they sent me a clutch set for a 93+ 4cyl...
The incorrect one's one it's way back to MC, and they are sending me the right one, but I wont see it until next week
The incorrect one's one it's way back to MC, and they are sending me the right one, but I wont see it until next week
#638
Contributing Member
Thread Starter
#639
Contributing Member
Thread Starter
well I ordered a 130amp direct bolt in alternator last night using a friends suggestion; eBay; DON'T KILL ME, he's been using one from the seller for almost 2 years now on his Mustang and he says it's GREAT, no problems at all!
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
Plus, the seller does have pretty good feedback too
We'll see how it works out; I'll definately let you guys know how it turns out
Now I just need to upgrade the main charge wire from it, lol, cause I have a slight feeling the stock wire isn't going to hold a 130amp charge very good
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
Plus, the seller does have pretty good feedback too
We'll see how it works out; I'll definately let you guys know how it turns out
Now I just need to upgrade the main charge wire from it, lol, cause I have a slight feeling the stock wire isn't going to hold a 130amp charge very good
#640
Contributing Member
Thread Starter
one last update for today
I got into the engine bay this afternoon and started repairing some wiring that was falling apart after 18 years Everthing from the main wiring harness by the fuse box, rewrapping the entire length of wire running over to the ignition module and AFM, the engine wiring harness itself, and the ground and starter power wire attached to the passenger side frame
I also went ahead and tapped into the wire that engages the AC compressor clutch for a lead to the radiator fan controller box
Sorry no pics, but I might put some up tomorrow, it all depends on what time I get home. I have to go into work on a Sunday to finish up a few last this before a branch audit on Monday yay
I got into the engine bay this afternoon and started repairing some wiring that was falling apart after 18 years Everthing from the main wiring harness by the fuse box, rewrapping the entire length of wire running over to the ignition module and AFM, the engine wiring harness itself, and the ground and starter power wire attached to the passenger side frame
I also went ahead and tapped into the wire that engages the AC compressor clutch for a lead to the radiator fan controller box
Sorry no pics, but I might put some up tomorrow, it all depends on what time I get home. I have to go into work on a Sunday to finish up a few last this before a branch audit on Monday yay
Last edited by iamsuperbleeder; 07-11-2009 at 05:46 PM.