Bleeder-Dude's Official 22re Engine Rebuild Thread - TONS OF PICTURES!!!
05-31-2009, 05:24 PM
#281
Registered User
Something like this is what I have in mind.
http://cgi.ebay.com/ebaymotors/HOBBS...1%7C240%3A1318
Last edited by Junkers88; 05-31-2009 at 05:27 PM.
05-31-2009, 05:27 PM
#284
Contributing Member
Thread Starter
okay, okay guys... don't gimme anymore ideas now, lol
we'll see... a light glow might not look to bad... once everything's put together, we'll see
MAYBE, I'll leave it at that for now
we'll see... a light glow might not look to bad... once everything's put together, we'll see
MAYBE, I'll leave it at that for now
05-31-2009, 07:22 PM
#285
Registered User
Thank ya!
I used VHT Header Paint
The stuff lays on pretty good! I scrubbed the entire thing down with a red scotchbright pad, gave it a coat of brake cleaner to get any dust or residue off, loosely bolted it to my engine stand, and gave it about 5 light coats
it should hold better than that crap Pacesetter puts on them 
I used VHT Header Paint
The stuff lays on pretty good! I scrubbed the entire thing down with a red scotchbright pad, gave it a coat of brake cleaner to get any dust or residue off, loosely bolted it to my engine stand, and gave it about 5 light coats
it should hold better than that crap Pacesetter puts on them that stuff is awsome, sprayed 3 coats on my miniheader when I did the swap almost 8months ago and it still looks brand new.
No peeling or anything
every thing else is looking great too. keep up the great work.......
06-01-2009, 12:38 PM
#286
Contributing Member
Thread Starter
wow... there goes another $580... just called up engnbldr and ordered my Street RV Head and 261 cam
only one more large order to place, from LCE, and pay whatever fees for the machining, and then all the high expenses are paid
alrighty, it's 4:39 PM here, so it's time to get outisde and do some more cleaning
only one more large order to place, from LCE, and pay whatever fees for the machining, and then all the high expenses are paid
alrighty, it's 4:39 PM here, so it's time to get outisde and do some more cleaning
Last edited by iamsuperbleeder; 06-01-2009 at 12:39 PM.
06-01-2009, 05:03 PM
#290
Contributing Member
Thread Starter
well I'm starting to hit a few of the items that I'll have to face the fact that their not going to come AS CLEAN as I want them... but they'll do...
but on the flip-side, the lower intake manifold came pretty clean
I've got a few more spot to tape up on it (I ran out of day-light today, and the meskeeters were start'n to get me), and I'll be hit'n it with some primer and Chrystler Red engine paint
but on the flip-side, the lower intake manifold came pretty clean
I've got a few more spot to tape up on it (I ran out of day-light today, and the meskeeters were start'n to get me
), and I'll be hit'n it with some primer and Chrystler Red engine paint
06-01-2009, 05:10 PM
#292
Contributing Member
Thread Starter
06-01-2009, 07:49 PM
#294
Contributing Member
Thread Starter
I REEEAAALLLLY need to stop looking around on LCE's site... I just found a replacement for my falling apart intake tube
http://www.toyotacatalog.net/M1WebGe...A-46E12D5DB437
and look at that; the colors will match perfectly
http://www.toyotacatalog.net/M1WebGe...A-46E12D5DB437
and look at that; the colors will match perfectly
06-01-2009, 08:14 PM
#296
Contributing Member
Thread Starter
actually, I didn't think it was that bad 
I wish I could get just the tube and rubber joints though; I don't need that little K&N filter thingamajiggy, I'm doing away with the air injection
I might give them a call and see if we can't work out a deal
I wish I could get just the tube and rubber joints though; I don't need that little K&N filter thingamajiggy, I'm doing away with the air injection
I might give them a call and see if we can't work out a deal
...then heck yeah man buy it!!
06-01-2009, 08:31 PM
#299
Contributing Member
Thread Starter
06-02-2009, 04:53 PM
#300
Contributing Member
Thread Starter
well dang... nothing done today, cept fer sum shop'n
stopped by the parts store for some more engine paint primer, and some more Chrystler red, and ended up getting a new warantee replacement radiator coming in, and an electric fan and wiring harness
stopped by the parts store for some more engine paint primer, and some more Chrystler red, and ended up getting a new warantee replacement radiator coming in, and an electric fan and wiring harness
