Belt Routing Question (Air Conditioning)
#22
So I fired the truck up today and cut the A/C on and there is a horrible screeching sound from the belt. Needless to say I'm going to reroute my belts correctly and leave the A/C out of it until I can get a new pulley.
My next question, is it possible to just get a new pulley/clutch? As far as I know the compressor is good and I don't want to replace the whole setup. Would Advanced Auto Parts/Autozone/Napa have what I need? Thanks guys for all of the advice.
I have a stock vinyl bench seat and can only imagine how much sweating I would do in this little truck during this HOT summer! Definitely need to solve this A/C problem
My next question, is it possible to just get a new pulley/clutch? As far as I know the compressor is good and I don't want to replace the whole setup. Would Advanced Auto Parts/Autozone/Napa have what I need? Thanks guys for all of the advice.
I have a stock vinyl bench seat and can only imagine how much sweating I would do in this little truck during this HOT summer! Definitely need to solve this A/C problem
#23
Registered User
I would imagine you could get one form somewhere, but i would think your more than likely going to have to pull one form a wrecker or order a whole compressor
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
07-14-2020 08:35 PM
BeMiceElf
Misc Stuff (Vehicle Related)
7
10-10-2015 09:40 PM
icentropy
86-95 Trucks & 4Runners
7
07-14-2015 10:23 AM
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
07-09-2015 07:55 AM
1988, 22re, 96, ac, air, belt, compressor, conditioning, configuration, location, pickup, pulley, routing, sticks, toyota