Auto to manual swap problems
#1
Registered User
Thread Starter
Auto to manual swap problems
Hello everyone I started my auto to manual swap and got just about done and there are a couple things that are not right. One my bottom right bell housing bolts (14mm head) do not align all the other bolts do just not that one and the other which is more strange my clutch fork is stuck closer to the engine causing me to not fit my slave cylinder. The last problem is my speed sensor I removed from my automatic is a mechanical one and the one on my r150f is electrical. I have a japanese 95 4runner and my donor truck is a 92 4runner with a
r150f.
r150f.
Thread
Thread Starter
Forum
Replies
Last Post