Another issue with rear window
#42
Registered User
Thread Starter
Since my switch is wires direct I can put the window up with the gate down its a lot easier to clean that way so soon it will get a full detain cleaning touch up pain sand and primer dents and re paint sr5 stripes black
#43
Nice! I highly recommend lubricating everything before you re-install, if you haven't yet. Just rebuild the harness. Shouldn't be too difficult. Measure each wire, use proper gauge, and label everything. All should be accessible once you take off the left side panels.
#44
Registered User
Join Date: Feb 2013
Location: Bellingham, WA
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
I was at a bone yard today @30 minutes from my house. They have the remnants of an 88 Runner that looked to still have the rear harness in tact. The only thing I saw missing was the plugs to the 3 switches in the console. I didn't look to see if it had the wiring for the rear heater, don't know that you have that or not. If your interested in sending me down to grab it shoot me a PM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
icentropy
86-95 Trucks & 4Runners
10
07-11-2015 07:21 AM
icentropy
86-95 Trucks & 4Runners
4
07-09-2015 02:12 PM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
07-06-2015 04:07 AM