92 TOY's 22re / crapped out / gotta start somewhere / thread
#1381
YotaTech Milestone-Two Millionth Post
Thread Starter
#1382
YotaTech Milestone-Two Millionth Post
Thread Starter
so while all the smart people in the world are still sleeping on their day off....I'm in the garage having a smoke and a coffee and thought I'd start messing around.......
several little metal tubes that need cleaning and painting....but they are in bags that are marked.....and I'm thinking , how do I not forget what these tubes are for....so I took post-it notes and wrote on them and put them inside the tubes....should work out OK but I think maybe I will put those notes in a little baggie too since I plan on cleaning the parts up and I'm afraid the water will ruin the notes....we will see, but here's some pics to show what I'm doing but also to be a reference for me....so don't mind so many pics......
Want them to end up looking like these.......that vacuum line one is going to be red....
several little metal tubes that need cleaning and painting....but they are in bags that are marked.....and I'm thinking , how do I not forget what these tubes are for....so I took post-it notes and wrote on them and put them inside the tubes....should work out OK but I think maybe I will put those notes in a little baggie too since I plan on cleaning the parts up and I'm afraid the water will ruin the notes....we will see, but here's some pics to show what I'm doing but also to be a reference for me....so don't mind so many pics......
Want them to end up looking like these.......that vacuum line one is going to be red....
#1383
YotaTech Milestone-Two Millionth Post
Thread Starter
another current dilemma is that TED included a ton of gaskets etc with the gasket kit I ordered but some of them I have NO CLUE what they are......I will play that as I go along......I'm going to try and see if there is a gasket in there for the plate on the back of the head and other parts of the head but I am not going to just start pulling stuff off to see if I have a corresponding gasket and find out I don't. That would not be good.
#1384
YotaTech Milestone-Two Millionth Post
Thread Starter
My plan for today ...(and I have to be realistic in that there's other stuff to be done) is to clean and paint those tubes and clean the top of the block and piston tops PERFECT and have all that ready to go and probably move the head from my basement up to the garage so I could continue cleaning it in the driveway instead of sickening myself with fumes doing it in the basement like I did before.....fumes are a bad thing.
#1385
YotaTech Milestone-Two Millionth Post
Thread Starter
so then, I was in the Auxiliary Toyota Research Room, and thinking...not plastic bags but saran wrap.....so I wrapped my little notes inside that.
#1386
YotaTech Milestone-Two Millionth Post
Thread Starter
and then....because it was now 7am, I thought I'd bring out the rest of what I could think of that needs to be pressure washed and degreased.......
and some reference pics for me.....
and some reference pics for me.....
#1387
Contributing Member
lol, you want to see what I'm doing at 7am today? (well, it's after 8 now but still...
SUPERMASSIVE IFS POSER SHOTS!
god I'm bored... where's UPS...
SUPERMASSIVE IFS POSER SHOTS!
god I'm bored... where's UPS...
Last edited by iamsuperbleeder; 03-20-2010 at 04:14 AM.
#1388
Registered User
#1389
YotaTech Milestone-Two Millionth Post
Thread Starter
#1390
YotaTech Milestone-Two Millionth Post
Thread Starter
#1391
Registered User
About the exhaust manifold, I wanted to do something to dress it up but I know that it will get far too hot for the Duplicolor high heat engine paint I have been using. It is only rated for 500 deg. While I was at the auto parts store, I found some VHT flame proof header paint that is good all the way up to 2000 deg. So I am going to paint mine with that & see how well it holds up.
#1394
YotaTech Milestone-Two Millionth Post
Thread Starter
ya know it was 745 and it was a balmy 36 degrees, so what better time to break out the garden hose and the pressure washer....hahahhahaha
#1396
YotaTech Milestone-Two Millionth Post
Thread Starter
#1397
Registered User
I bought a can of silver VHT paint for the exhaust manifold because I was going to pain the block black. But then somebody talked me into painting the block silver instead so now I am going back to the parts store to swap my silver can for a black one or else it would just be too much silver. My exhaust manifold is missing the heat sheild so it is going to be in plain veiw.
#1398
YotaTech Milestone-Two Millionth Post
Thread Starter
I bought a can of silver VHT paint for the exhaust manifold because I was going to pain the block black. But then somebody talked me into painting the block silver instead so now I am going back to the parts store to swap my silver can for a black one or else it would just be too much silver. My exhaust manifold is missing the heat sheild so it is going to be in plain veiw.
was doing some painting.....pics are coming
#1400
YotaTech Milestone-Two Millionth Post
Thread Starter
valve cover I'm saving to do a 10 page write-up on.....hahahahah
haven't made up my mind on that.....don't really want it to look like everybody else's...so I'm gonna get a little creative....I think......we'll see.
haven't made up my mind on that.....don't really want it to look like everybody else's...so I'm gonna get a little creative....I think......we'll see.