92 TOY's 22re / crapped out / gotta start somewhere / thread
#941
Registered User
Ya Ted's good like that...if you ordered straight from him I'm sure he combined everything and saved ya a buck or two.
Thinking back I should have done all that as well when I was in there. All I did was the HG and cam. I think I should have swapped the chain and guides as least. I'm sure I'll be in there again someday and I'll do them then.
Thinking back I should have done all that as well when I was in there. All I did was the HG and cam. I think I should have swapped the chain and guides as least. I'm sure I'll be in there again someday and I'll do them then.
#942
YotaTech Milestone-Two Millionth Post
Thread Starter
Ya Ted's good like that...if you ordered straight from him I'm sure he combined everything and saved ya a buck or two.
Thinking back I should have done all that as well when I was in there. All I did was the HG and cam. I think I should have swapped the chain and guides as least. I'm sure I'll be in there again someday and I'll do them then.
Thinking back I should have done all that as well when I was in there. All I did was the HG and cam. I think I should have swapped the chain and guides as least. I'm sure I'll be in there again someday and I'll do them then.
Oh, but look at the LOVELY pictorial you will have to use as a reference.......
#946
YotaTech Milestone-Two Millionth Post
Thread Starter
I just email'd Ted at ENGNBLDR and told him what I want and asked about combined shipping....so I guess I will just wait for a reply to pull the trigger on this..WOOHOO!!!
#947
YotaTech Milestone-Two Millionth Post
Thread Starter
Ok.
The deed is done.
I ordered from Ted. It could not have been any easier either.
I recommend anyone that is looking to buy, buy stuff from him. I know that echoes the sentiment I've seen on YOTATECH since I got here a year ago, but now I have 1st-hand experience...I give MY RECOMMENDATION also.
The deed is done.
I ordered from Ted. It could not have been any easier either.
I recommend anyone that is looking to buy, buy stuff from him. I know that echoes the sentiment I've seen on YOTATECH since I got here a year ago, but now I have 1st-hand experience...I give MY RECOMMENDATION also.
#948
Ok.
The deed is done.
I ordered from Ted. It could not have been any easier either.
I recommend anyone that is looking to buy, buy stuff from him. I know that echoes the sentiment I've seen on YOTATECH since I got here a year ago, but now I have 1st-hand experience...I give MY RECOMMENDATION also.
The deed is done.
I ordered from Ted. It could not have been any easier either.
I recommend anyone that is looking to buy, buy stuff from him. I know that echoes the sentiment I've seen on YOTATECH since I got here a year ago, but now I have 1st-hand experience...I give MY RECOMMENDATION also.
Glad to see you ordered your stuff man!
#949
YotaTech Milestone-Two Millionth Post
Thread Starter
Dude...i was just searching your thread......
Is THIS what you bought? http://cgi.ebay.com/12mm-12-x-1-25-M...item19ba12725e
#951
Registered User
Join Date: Jan 2010
Location: Sonora, CA (Central Sierra)
Posts: 447
Received 0 Likes
on
0 Posts
Ok.
The deed is done.
I ordered from Ted. It could not have been any easier either.
I recommend anyone that is looking to buy, buy stuff from him. I know that echoes the sentiment I've seen on YOTATECH since I got here a year ago, but now I have 1st-hand experience...I give MY RECOMMENDATION also.
The deed is done.
I ordered from Ted. It could not have been any easier either.
I recommend anyone that is looking to buy, buy stuff from him. I know that echoes the sentiment I've seen on YOTATECH since I got here a year ago, but now I have 1st-hand experience...I give MY RECOMMENDATION also.
OK, there was not NEARLY enough fanfare for this, so here goes. Ahem...
YES! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES! Thank you lord Jesus! WOOOOOHOOOOO!!!!!! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES!:rocki n: :for k::mr t:: bounce::po pcorn: :b anger::gui tar::guita r::bi gok:
#952
Registered User
Join Date: Jan 2010
Location: Sonora, CA (Central Sierra)
Posts: 447
Received 0 Likes
on
0 Posts
Yeah, I would. M12x1.25 SOUNDS right, but I always feel a lot healthier with a stare and compare. Also, by the time you add shipping, the price difference shouldn't be too great. Vermont American taps on this side of the country are literally about 8-12$, that aint too bad on the pocketbook...
#954
Registered User
Congrats! You ordered the parts. Now once it warms up a smidgen you can get cracking.
I broke one of my swaybar bolts when doing my clutch. Just get an easy out and the broken piece will back right out. Mine took all of 5 minutes to remove. Basically an EZ out is a reverse twist brill bit. You drill a pilot hole in the broken bolt in the frame then drill the ez out into that and it backs right out..
Kirk
I broke one of my swaybar bolts when doing my clutch. Just get an easy out and the broken piece will back right out. Mine took all of 5 minutes to remove. Basically an EZ out is a reverse twist brill bit. You drill a pilot hole in the broken bolt in the frame then drill the ez out into that and it backs right out..
Kirk
#955
YotaTech Milestone-Two Millionth Post
Thread Starter
Congrats! You ordered the parts. Now once it warms up a smidgen you can get cracking.
I broke one of my swaybar bolts when doing my clutch. Just get an easy out and the broken piece will back right out. Mine took all of 5 minutes to remove. Basically an EZ out is a reverse twist brill bit. You drill a pilot hole in the broken bolt in the frame then drill the ez out into that and it backs right out..
Kirk
I broke one of my swaybar bolts when doing my clutch. Just get an easy out and the broken piece will back right out. Mine took all of 5 minutes to remove. Basically an EZ out is a reverse twist brill bit. You drill a pilot hole in the broken bolt in the frame then drill the ez out into that and it backs right out..
Kirk
Hey thanks....can't wait for the warmer weather for many reasons now. Those broken bolts are just a nuisance now......an easy out, I thought of, but won't get my hopes up with the amount of corrosion from the road salt around here. then again, I see so many say they run without the swaybar, probably won't put it back on anyway....just have to cut it off now.
Yes, I've been running through everything in my head......kinda hard to do it in reverse when you aren't done with the forward motion yet (oil pan).
stay tuned
#958
YotaTech Milestone-Two Millionth Post
Thread Starter
when i was emailing w/ ted he said that he would pack everything together but he was waiting for a delivery of covers. seriously, what's my hurry anyway?
but i think it's expected to be mailed by the end of the week. so then i get to stare at that for a while.
why am i such a sissy about it being cold out? i just don't feel like being out in the garage at all until it warms up a bit....that's all. Now if I were in some sort of hurry it would be a different story....but obviously I'm not.
LUMPY...sorry to hear about the tax thing. I'm not sure how much of our's is left anyway. never enough in the 1st place....especially when i pay all our taxes with it and buy a pizza with the leftover money.
My mother says "want less"..... problem is, the stuff I need is killing us. we run about as lean as it gets. i genuinely feel sorry for alot of people...and don't want any sympathy myself...I made this mess myself and I have to deal with it.
but i think it's expected to be mailed by the end of the week. so then i get to stare at that for a while.
why am i such a sissy about it being cold out? i just don't feel like being out in the garage at all until it warms up a bit....that's all. Now if I were in some sort of hurry it would be a different story....but obviously I'm not.
LUMPY...sorry to hear about the tax thing. I'm not sure how much of our's is left anyway. never enough in the 1st place....especially when i pay all our taxes with it and buy a pizza with the leftover money.
My mother says "want less"..... problem is, the stuff I need is killing us. we run about as lean as it gets. i genuinely feel sorry for alot of people...and don't want any sympathy myself...I made this mess myself and I have to deal with it.
#959
Registered User
I'll have a few $$$ left over after I get some things for the house but not much...I'll do what I have to, such is life.
Well the good news is that your parts are coming soon!!! It's going to be better than Christmas when you get that box!!! I remember my excitement last year when mine came.
Spring is coming...warm weather is on its way, you'll have it up and running soon, very soon.
Well the good news is that your parts are coming soon!!! It's going to be better than Christmas when you get that box!!! I remember my excitement last year when mine came.
Spring is coming...warm weather is on its way, you'll have it up and running soon, very soon.