92 TOY's 22re / crapped out / gotta start somewhere / thread
#3441
Registered User
iTrader: (5)
Far as Toyota.... those clamps are pretty cheap and so was the hose, ...but I couldn't wait 3 days, from Michigan......., so I hit,....hmmm, now that I think I'm pretty sure it WAS NAPA..... Anyway, pretty sure O'Reily will have it, or one of them. They just told me, at Autozone, .."We're open til 10pm tonight, come on down"... (picked up some bulbs for the CRV...head light went out last night, ...had a CHP pull next to me and yell at me with the PA, "HEY, ... gotta head light out!"... to which I responded, 'THANKS, MR. OFFICER, SIR!!!! " hahaha.)
#3442
Registered User
ok let me know on the valves thing, I'll reset them for ya again./ They probablty need it though, since they really should have been readjusted a few hundred miles in. I know it's a PITA to remove a 22re valve cover though. 5 minutes on mine and it's off. Especially with the weber on there. lol.
#3447
Registered User
iTrader: (5)
Woot! lol. 9.99$ sounds good!
I actually got all of them, ....couple from toyota, couple from autoparts stores. BTW, I was not thinking of the same hose.... and now, watching the vid again, ...I was way off, lol. However, your 92 might not be the same, in fact I'm pretty sure it is different. Yeah, tha'ts a bigger hose, weird angles, .....Just like my IACV hoses from them.... they were not cheap, but not so much that I didn't want the good'ns, lol.(those were vacuum though,.... The IACV coolant ones,..... O'reily's, lol)
I actually got all of them, ....couple from toyota, couple from autoparts stores. BTW, I was not thinking of the same hose.... and now, watching the vid again, ...I was way off, lol. However, your 92 might not be the same, in fact I'm pretty sure it is different. Yeah, tha'ts a bigger hose, weird angles, .....Just like my IACV hoses from them.... they were not cheap, but not so much that I didn't want the good'ns, lol.(those were vacuum though,.... The IACV coolant ones,..... O'reily's, lol)
#3448
YotaTech Milestone-Two Millionth Post
Thread Starter
yeh...looking at those pics, I'm not so sure those hoses are all the same thing. I'd have to actually see it .....
#3450
YotaTech Milestone-Two Millionth Post
Thread Starter
it's OK.....it was cracked right above the connection....probably on and off too many times. I will order the TOYOTA one and be done with it. I believe I have a 15% coupon...somewhere
#3451
Registered User
Here is a little reading enjoyment for you.
https://www.yotatech.com/forums/f115...please-235362/
However doble check with your dealer to make sure that part number is correct. I have found my 88 to be different then my 91. Not in the diameter of the hose but in size, the 91 needed to be longer. If you do get a part number, let us know so I can double check with that linked thread. I'll update as needed.
https://www.yotatech.com/forums/f115...please-235362/
However doble check with your dealer to make sure that part number is correct. I have found my 88 to be different then my 91. Not in the diameter of the hose but in size, the 91 needed to be longer. If you do get a part number, let us know so I can double check with that linked thread. I'll update as needed.
#3452
YotaTech Milestone-Two Millionth Post
Thread Starter
Here is a little reading enjoyment for you.
https://www.yotatech.com/forums/f115...please-235362/
However doble check with your dealer to make sure that part number is correct. I have found my 88 to be different then my 91. Not in the diameter of the hose but in size, the 91 needed to be longer. If you do get a part number, let us know so I can double check with that linked thread. I'll update as needed.
https://www.yotatech.com/forums/f115...please-235362/
However doble check with your dealer to make sure that part number is correct. I have found my 88 to be different then my 91. Not in the diameter of the hose but in size, the 91 needed to be longer. If you do get a part number, let us know so I can double check with that linked thread. I'll update as needed.
I will read that thread. however, that part # is from the VIN-specific stuff from Toyota Parts Zone's site.
#3454
YotaTech Milestone-Two Millionth Post
Thread Starter
OK...Roger that.
gonna search around a bit for stuff......made up a list of things we need, for me and the for Joe's 4runner build and it came to $142.....so want to get the best price. I had good luck with dealerpartdirect.com......but I'm heading out to play basketball with my boys and finish cutting the grass
#3455
YotaTech Milestone-Two Millionth Post
Thread Starter
to make up for the neglect that caused the hose failure, I offered my truck some fresh oil and new oil filter. hope it likes it.
and Joe did all the work too.
and Joe did all the work too.
#3457
YotaTech Milestone-Two Millionth Post
Thread Starter
I had no problem letting him do that. kinda was pretty cool to see him do it and hear him say"no dad, I'll get it"
#3459
YotaTech Milestone-Two Millionth Post
Thread Starter