92 TOY's 22re / crapped out / gotta start somewhere / thread
#2861
Registered User
iTrader: (6)
As said before i will miss this thread from it's randomness to the drama that occured but i have a sneaking suspicion that it'll be around for awhile. Besides there are at least 10,000 more people that need to chime in and send their congrats on finishing. Plus look at it this way. There will be many a newb asking were the spider fits on the intake manifold and how are you supposed to break the cam gear. Have fun 92 i think you'll be fielding Q's for some time in the future.
#2862
YotaTech Milestone-Two Millionth Post
Thread Starter
As said before i will miss this thread from it's randomness to the drama that occured but i have a sneaking suspicion that it'll be around for awhile. Besides there are at least 10,000 more people that need to chime in and send their congrats on finishing. Plus look at it this way. There will be many a newb asking were the spider fits on the intake manifold and how are you supposed to break the cam gear. Have fun 92 i think you'll be fielding Q's for some time in the future.
the cam gear....heehehehehe....ahhhhh, memories....
thanks mightymouse....i hope it stays active
#2863
YotaTech Milestone-Two Millionth Post
Thread Starter
i email'd the guy about the tires.....told him i wanted the 2 definity's.....and only those 2.........if they are decent and he wants like $100 or $125 i would do it....if he can hold out until Thursday
#2865
YotaTech Milestone-Two Millionth Post
Thread Starter
BUY THEM........then I will trade you a set of feeler gauges for 2 tires........hehehehehehe.......do it...i will buy the definity's off of you.......i'm friggin poor....you saw what i have to pay for out here......you could use my garage...........
#2868
YotaTech Milestone-Two Millionth Post
Thread Starter
#2869
Registered User
Join Date: Oct 2009
Location: Downtown Heckronto, Ontario, Soviet Canuckistan
Posts: 1,499
Likes: 0
Received 1 Like
on
1 Post
DO IT, FOR GREAT JUSTICE!
Last edited by Magnusian; 05-21-2010 at 12:24 PM.
#2870
YotaTech Milestone-Two Millionth Post
Thread Starter
Well, if you want to swap to a 4-banger you can still go 3.4L displacement... Drop in a 3B out of a BJ75! Might be hard to do, and you might have to get the motor from Mexico, and it might not be allowed on the road, but then your son could say he runs a diesel and did a 3.0L to 3.4L swap!
DO IT, FOR GREAT JUSTICE!
DO IT, FOR GREAT JUSTICE!
hahahhahahahhaa
no.
#2872
YotaTech Milestone-Two Millionth Post
Thread Starter
EMAIL to Ted at ENGNBLDR:
Ted, just wanted to let you know my truck is up and running as of yesterday.........
YOTATECH thread....i believe page 110 is about the area (post #2476, i think) https://www.yotatech.com/forums/f116...thread-188472/
thank you for your help....and products.....and great prices
do you have any decals?????........i would love to give you proper credit on my truck....if not...make some dammit...!!
Thanks,
HIS RESPONSE:
Thanks, that means that you did a good job!
Decals? People have been bugging me about that for ages, I need a few dozen 28 hours days here...
Thanks,
Ted
hehehehehe...i guess that's a NO....hmmmmmmmmm.....gotta think of something.....CODY.....Oh CODY where are you?
Ted, just wanted to let you know my truck is up and running as of yesterday.........
YOTATECH thread....i believe page 110 is about the area (post #2476, i think) https://www.yotatech.com/forums/f116...thread-188472/
thank you for your help....and products.....and great prices
do you have any decals?????........i would love to give you proper credit on my truck....if not...make some dammit...!!
Thanks,
HIS RESPONSE:
Thanks, that means that you did a good job!
Decals? People have been bugging me about that for ages, I need a few dozen 28 hours days here...
Thanks,
Ted
hehehehehe...i guess that's a NO....hmmmmmmmmm.....gotta think of something.....CODY.....Oh CODY where are you?
#2873
Registered User
iTrader: (5)
Hey 92, sorry for the highjack, but I NEED HELP!
I posted on my build thread, what's going on. The wrap around pipe that starts up in the rear firewall and wraps around to the passenger side(yes, that PITA), going up into the head I believe, ....it's leaking oil. It has that lil rubber boot that goes over the pipe-end flange, but no matter how tight I get it(didn't want to snap it off), it continues to leak oil!!!!!!!!!!
Anyone have any ideas? I might be able to seal it up without removing the intake, but I'M REALLY A BIT TICKED right now, and any help would be greatly appreciated!
Mark
I posted on my build thread, what's going on. The wrap around pipe that starts up in the rear firewall and wraps around to the passenger side(yes, that PITA), going up into the head I believe, ....it's leaking oil. It has that lil rubber boot that goes over the pipe-end flange, but no matter how tight I get it(didn't want to snap it off), it continues to leak oil!!!!!!!!!!
Anyone have any ideas? I might be able to seal it up without removing the intake, but I'M REALLY A BIT TICKED right now, and any help would be greatly appreciated!
Mark
#2874
YotaTech Milestone-Two Millionth Post
Thread Starter
realized i didn't have a good pic of the engine...finished...
and got me some help today while mom and big brother are on a trip to Hershey Park
and got me some help today while mom and big brother are on a trip to Hershey Park
#2875
YotaTech Milestone-Two Millionth Post
Thread Starter
Hey 92, sorry for the highjack, but I NEED HELP!
I posted on my build thread, what's going on. The wrap around pipe that starts up in the rear firewall and wraps around to the passenger side(yes, that PITA), going up into the head I believe, ....it's leaking oil. It has that lil rubber boot that goes over the pipe-end flange, but no matter how tight I get it(didn't want to snap it off), it continues to leak oil!!!!!!!!!!
Anyone have any ideas? I might be able to seal it up without removing the intake, but I'M REALLY A BIT TICKED right now, and any help would be greatly appreciated!
Mark
I posted on my build thread, what's going on. The wrap around pipe that starts up in the rear firewall and wraps around to the passenger side(yes, that PITA), going up into the head I believe, ....it's leaking oil. It has that lil rubber boot that goes over the pipe-end flange, but no matter how tight I get it(didn't want to snap it off), it continues to leak oil!!!!!!!!!!
Anyone have any ideas? I might be able to seal it up without removing the intake, but I'M REALLY A BIT TICKED right now, and any help would be greatly appreciated!
Mark
#2879
YotaTech Milestone-Two Millionth Post
Thread Starter
#2880
Registered User
Join Date: Jul 2008
Location: Grew up in S.C.V, So Cal.....now in Hampstead, NC
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
hahahahaha, no a "cam light" is a light thats helps you see the cam working. It was an old joke we used in my auto repair class. Not a shift light.....lol