92 TOY's 22re / crapped out / gotta start somewhere / thread
#2242
YotaTech Milestone-Two Millionth Post
Thread Starter
#2247
YotaTech Milestone-Two Millionth Post
Thread Starter
good news......but i guess you are gonna have to read it later LUMPY....i got all that crap back on....
#2248
YotaTech Milestone-Two Millionth Post
Thread Starter
we'll start off with this pic again
and this pic
neither one by themselves really make any sense.....and i could stare at all the pictures trying to imagine how it all goes together, so i just went down and started messing with it.
1st i mocked-up this
then i took it off and started messing with the GOLD brace....actually it's a good thing i painted it a different color, it really helped figure stuff out....so i recommend doing that.
bolts just below the driver's side of the water pump.....way out of reach....
and sits like this
and then THIS happened
and then THIS....I argued with the WOODRUFF KEY for a bit until it finally saw things my way and let me get the pulley on
and this pic
neither one by themselves really make any sense.....and i could stare at all the pictures trying to imagine how it all goes together, so i just went down and started messing with it.
1st i mocked-up this
then i took it off and started messing with the GOLD brace....actually it's a good thing i painted it a different color, it really helped figure stuff out....so i recommend doing that.
bolts just below the driver's side of the water pump.....way out of reach....
and sits like this
and then THIS happened
and then THIS....I argued with the WOODRUFF KEY for a bit until it finally saw things my way and let me get the pulley on
Last edited by 92 TOY; 04-27-2010 at 01:25 PM.
#2253
YotaTech Milestone-Two Millionth Post
Thread Starter
for belt routing
https://www.yotatech.com/forums/f116...l#post51189114
https://www.yotatech.com/forums/f116...l#post51195509
https://www.yotatech.com/forums/f116...l#post51189114
https://www.yotatech.com/forums/f116...l#post51195509
Last edited by 92 TOY; 04-27-2010 at 02:13 PM.
#2256
YotaTech Milestone-Two Millionth Post
Thread Starter
and then i remembered that i never painted the adjusting pulley for the power steering and so, since i was out of all the good paint, i sanded it down and painted it GOLD too.
actually, I'm kinda taking a liking to the GOLD....hehehehehe
and an overview
belts are snugged up as i think they should be, but i am expecting they may need some adjusting after it's running
actually, I'm kinda taking a liking to the GOLD....hehehehehe
and an overview
belts are snugged up as i think they should be, but i am expecting they may need some adjusting after it's running
#2258
YotaTech Milestone-Two Millionth Post
Thread Starter
tomorrow's plan is to do the exhaust...i remember hooking onto the downpipe will probably be a PITA since taking it apart was one.
then it's on to the INTAKE side.......wooooohoooo
#2259
Registered User
Looking great!!!
The exhaust won't be too bad...but what I'd do is the head first. I may have missed something but if I recall correctly you still need to torque that head down. I'd do that before the manifolds.
The exhaust won't be too bad...but what I'd do is the head first. I may have missed something but if I recall correctly you still need to torque that head down. I'd do that before the manifolds.
#2260
YotaTech Milestone-Two Millionth Post
Thread Starter
itching to do the exhaust right now.......but it will wait until tomorrow when i can use daylight in addition to my work light.