92 TOY's 22re / crapped out / gotta start somewhere / thread
#2101
Registered User
sweet. Had the wife help me run the jack on my front diff regear. I said "go slow when the diff is close." She heard, "go slow." So she took her freakin time getting the jack in place as I am trying to balance the diff AND run the front bolt in place to hold it.
#2104
YotaTech Milestone-Two Millionth Post
Thread Starter
pics coming.
a few pointers.
1) FIPG is a PITA....when squeezing hard enough, it will come out the other end....words to live by.
2)ya need a helper....someone to hand you bolts......you need to keep exchanging a small extension, a long extension...bolt..bolt...wrench....I couldn't have done it without you Joe....forever this was the biggest help by far....good job.
3) I don't think i would recommend this at all to anyone. getting a 5mm bead of FIPG is a joke. trying to reach all the way to the back of the pan, or block, or both, is not impossible (because i did it) but stupid as all hell.
4)i feel real old
a few pointers.
1) FIPG is a PITA....when squeezing hard enough, it will come out the other end....words to live by.
2)ya need a helper....someone to hand you bolts......you need to keep exchanging a small extension, a long extension...bolt..bolt...wrench....I couldn't have done it without you Joe....forever this was the biggest help by far....good job.
3) I don't think i would recommend this at all to anyone. getting a 5mm bead of FIPG is a joke. trying to reach all the way to the back of the pan, or block, or both, is not impossible (because i did it) but stupid as all hell.
4)i feel real old
#2107
YotaTech Milestone-Two Millionth Post
Thread Starter
steering dampener in the way
lots of paint damage
even with a towel for padding
pan finally sitting level after that final adjustment of the diff
oil strainer back in place and torqued snug
and there ya have it
FIPG and crud....not a good time to be running low on orange stuff
lots of paint damage
even with a towel for padding
pan finally sitting level after that final adjustment of the diff
oil strainer back in place and torqued snug
and there ya have it
FIPG and crud....not a good time to be running low on orange stuff
#2108
YotaTech Milestone-Two Millionth Post
Thread Starter
next up is to put that plug back on the front of the transmission that i flashed a pic of........then it's time to put the diff back together.
#2112
YotaTech Milestone-Two Millionth Post
Thread Starter
OH
MY
GOD!
was the reaction when i walked in the house. today i became a man...............hahahahaha.
no, the day i got that crankshaft bolt of was the day.
MY
GOD!
was the reaction when i walked in the house. today i became a man...............hahahahaha.
no, the day i got that crankshaft bolt of was the day.
#2113
YotaTech Milestone-Two Millionth Post
Thread Starter
and if you ever happen to see my oilpan, it's because you walked in front of me, or i drove up on top of your hood.....so at this point i'm not too worried about it.
#2115
YotaTech Milestone-Two Millionth Post
Thread Starter
where the HELL have you been?
thought you got dead or something.
i was so dang nervous because of the bitch of a time you had with the pan....but in the same turn, i knew you got your's on, which meant it was possible...... i just didn't want to jack up the motor.
#2117
Registered User
Nice work. The whiff hates throwing my grimy clothes in the wash when I get done working under my rig. She told me once to take it to work and wash it there.
Um, is that a spongebob blanket? I'm not judging, I'm not judging.
#2120
Registered User