89silverpu

haha I tell you what, when/if my motor ever needs a rebuild, you help me do that and I'll help ya with the locker retrofit

89silverpu

I just ordered a Marlin e-locker motor guard for it and I don't think I'll get the chance to hook up the wiring harness today, but hopefully soon!

Oh and one question, do you have to take the third out of the axle to weld on diff armor like this?



It'd be nice to not have to take everything apart lol and I should've though about it before I put it all together

89silverpu

I ended up gettin the switch in the dash, but didn't get the wires hooked up yet. I'll let the pictures do the talking...








Also, can anyone answer this question for me???

Mic09dcsm

I think you could if you do it really really slowly. As in weld then let it cool an hour and have about five of those rotations and evenly divide the welding up between those times.

iamsuperbleeder

I'm down man!

874runnersr5

hahaha, offer still exists

89silverpu

Ok thanks! You think it'd mess up the gears and stuff otherwise? Have you ever welded on an axle before?

89silverpu

So you give me your 4runner and I'll give you the rear axle outta my truck? Deal! haha

89silverpu

Got my motor guard in the mail today...that was fast!! It came with a sticker and I already found a home for it this thing is way bigger and beefier than I imagined, made of quarter inch steel Hopefully I'll get it on the truck tomorrow...

Junkers88

Man that turtle makes me happy. I LOVE that sticker, if I didn't hate needles I'd have it on me somewhere in ink.

89silverpu

haha I know man, that sticker is a thing of beauty because of what it represents haha I can't wait to actually be able to legitely (is that a word? lol) sport the turtle when I get my duals

BigBluePile

iTrader: (3)

Dude that switch panel is freakin AWESOME!!!!!

89silverpu

I know! It was a little pricey, but I had to have one haha 12voltguy makes some sweet stuff!! It was an easy hook up, all the wires were labeled and color coded so it was just a matching game to hook it up to the diff

Mic09dcsm

Well, it's slang for legitimately.

89silverpu

haha that's the word I was lookin for thanks! I'm just about to go throw on the motor guard I'll post up some pics when I'm done

toyospearo

That setup is so sweet I cant hardly stand it!!!
NICE WORK!

89silverpu

I know man, I can't wait to get out and test it out tomorrow! I just gotta hook up my wiring harness which should only take like an hour or so...oh and put the motor guard on, I got side tracked today and ended up puttin the front third in instead lol seemed a little more important but I did the change a CV quick on the trail trick with the bolts so I can swap out the CV's I got from you and use my current ones as trail spares when I get the chance as well

89silverpu

I finally got everything all hooked up!! After I clean up everything and double check all the bolts, I'll be goin out to test it all out! Here's the final pics

Swappin the front diffs



Changed out the stock bolts for some 12x1.75x30 bolts to be able to quickly change a cv on the trail



Marlin motor guard

highonpottery

iTrader: (1)

good job man! i'm jealous of the e-locker. should paint your 3rd to match the freshly painted axle. also, too late now, but should have had the shop weld on some new shock mounts (for U-bolt flip) while they had it, especially if you're goin' down trails like fordyce. are those new CV bolts grade 8? they look like a regular grade bolt. i'd keep your stock ones around just in case - take a grinder to the ridges and they become bolts instead of studs. all us sac-vicinity YT'ers need to plan a trip for the summer!

934rnr

Make sure you pull that non add shaft off your old diff and put it on the new one. It's a little extra work but worth it. The add shaft is less beefy than the non add. Trust me take it apart and see...