YotaTech Forums

Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

'87 Turbo Restoration and Build

Thread Tools
 
Search this Thread
 
Old 07-10-2018 | 07:07 PM
  #81  
Charles4x4's Avatar
Charles4x4
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 487
Likes: 17
From: Birmingham, AL
Originally Posted by slacker
I make a replacement rear center piece .. will have it chrome wrapped and pics up soon . .. or can sell non wrapped , and you do it yourself
Great - I’m interested in Chrome. I also need the corners, brackets, and hardware. I only have the corners to wheel well long pieces today.
Reply Like
Old 07-11-2018 | 12:38 AM
  #82  
SomedayJ's Avatar
SomedayJ
Registered User
 
Joined: Jan 2017
Posts: 1,271
Likes: 333
Originally Posted by slacker
I make a replacement rear center piece .. will have it chrome wrapped and pics up soon . .. or can sell non wrapped , and you do it yourself
You have to make the corners also, slacker, they're almost impossible to find.
Reply Like
Old 07-11-2018 | 05:00 PM
  #83  
Charles4x4's Avatar
Charles4x4
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 487
Likes: 17
From: Birmingham, AL
New OEM
dome light cover arrived.
Reply Like
Old 07-12-2018 | 03:52 PM
  #84  
slacker's Avatar
slacker
Registered User
iTrader: (1)
 
Joined: Jan 2006
Posts: 6,317
Likes: 283
From: BC Canada
Originally Posted by SomedayJ
You have to make the corners also, slacker, they're almost impossible to find.
not yet , but there coming
Reply Like
Old 07-12-2018 | 06:48 PM
  #85  
wallytoo's Avatar
wallytoo
Registered User
iTrader: (1)
 
Joined: May 2013
Posts: 1,899
Likes: 815
From: nh
Originally Posted by Charles4x4
Great question. I haven't mastered it just yet, but I'm getting there:

Dome: 3175
Doors/Cargo: 3021
Dash/Altimiter: T10 194
Small Stuff like Shifter Light: T5 Wedge 3528
Small Switches: I'm still working on these. I purchased T3 Twist Style for the Gray 4Runner. The housings were too small, but I was able to pull the LEDs out and put them into the OEM housing and they work fine.

I'm missing a housing on the Rear Window Up/Down, so I'm trying some T4 and T5 twist type to see if they will fit instead.
the factory dash lights are 168, not 194, although they look identical. at least for dash illumination, high beam indicator, and flasher/turn signal indicators. not critical, as you are replacing with led anyway.
Reply Like
Old 07-12-2018 | 09:19 PM
  #86  
Charles4x4's Avatar
Charles4x4
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 487
Likes: 17
From: Birmingham, AL
Originally Posted by wallytoo


the factory dash lights are 168, not 194, although they look identical. at least for dash illumination, high beam indicator, and flasher/turn signal indicators. not critical, as you are replacing with led anyway.
Thanks for correcting that.
Reply Like
Old 07-16-2018 | 08:56 AM
  #87  
Discombobulated's Avatar
Discombobulated
Registered User
 
Joined: Oct 2011
Posts: 2,377
Likes: 257
From: Denver CO
Hey quick question on your carpet kit, I have been wanting to replace mine for a while went to the custom carpets site and for my truck they do not have the sound deadener or other options available. Did you have to get this custom added and call?

I searched your year as well and did not see these options available either just the standard kit??

Any updates or teaser pics of the paint

Reply Like
Old 07-16-2018 | 09:01 AM
  #88  
Charles4x4's Avatar
Charles4x4
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 487
Likes: 17
From: Birmingham, AL
Originally Posted by Discombobulated
Hey quick question on your carpet kit, I have been wanting to replace mine for a while went to the custom carpets site and for my truck they do not have the sound deadener or other options available. Did you have to get this custom added and call?

I searched your year as well and did not see these options available either just the standard kit??

Any updates or teaser pics of the paint
Here's mine from www.automatstore.com
  • 1984-1989 Toyota 4Runner Complete, 807 Dark Gray Cutpile, Mass Backing
    • Color: 807 Dark Gray
    • Note: Passenger area, back panel and wheel wells. Back panel covers back of rear seat.
    • reviewSKU: ACC--FLOORING--CUTPILE
  • ADD MASS BACKING
No pics of the paint just yet - I wish! 1-2 more weeks.
Reply Like
Old 07-16-2018 | 06:18 PM
  #89  
Charles4x4's Avatar
Charles4x4
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 487
Likes: 17
From: Birmingham, AL
OEM 2nd Gen Front floor mats arrived! I’ve been told these are a close fit to OEM 1st gen. I’ll figure out something for the rear later on.
Reply Like
Old 07-16-2018 | 06:20 PM
  #90  
Charles4x4's Avatar
Charles4x4
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 487
Likes: 17
From: Birmingham, AL
Also picked up my replacement Toyota OEM twist bulb for my rear window switch and swapped the halogen with a LED. For future reference, T4 LED Twist Type is the right size for small interior switches.
Reply Like
Old 07-17-2018 | 07:41 AM
  #91  
87_YOTY_RUNNER's Avatar
87_YOTY_RUNNER
Registered User
 
Joined: Jul 2017
Posts: 3
Likes: 0
Whats the story on the antenna mast? I've got one that is seized up and won't work.
Reply Like
Old 07-17-2018 | 07:47 AM
  #92  
Charles4x4's Avatar
Charles4x4
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 487
Likes: 17
From: Birmingham, AL
Originally Posted by 87_YOTY_RUNNER
Whats the story on the antenna mast? I've got one that is seized up and won't work.
My motor worked fine (check operation first). However, my mast was broken. A forum member told me to go to www.theantennasource.com and they had replacement masts:Item name:
Toyota 4 Runner Antenna Mast 1984-1988
Item number:
A173

Took me a bit to get the old broken one out, but was an easy install from there.
Reply Like
Old 07-17-2018 | 01:22 PM
  #93  
Charles4x4's Avatar
Charles4x4
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 487
Likes: 17
From: Birmingham, AL
Running into an issue with the Drivers Seat fabric tear. My local Trim Shop looked through 3 Detroit books, but no luck finding anything on '87 SR5 Gray Cloth. See attached pics of both the factory cloth and the "closest match" she could find.

I've searched Forum Classifieds and Ebay for replacements, but no luck so far. If we can find the specs on the material, she may be able to find some of it.

Any ideas?
Attached Thumbnails '87 Turbo Restoration and Build-87-toyota-4runner-sr5-turbo-gray-fabric-torn-front-seat.jpg   '87 Turbo Restoration and Build-87-toyota-4runner-sr5-turbo-gray-fabric-good-condition-rear-seat.jpg  
Reply Like
Old 07-17-2018 | 06:19 PM
  #94  
Discombobulated's Avatar
Discombobulated
Registered User
 
Joined: Oct 2011
Posts: 2,377
Likes: 257
From: Denver CO
Can you get on the horn and call a bunch of upholstery shops? Maybe one has that one guy that knows his stuff..
Reply Like
Old 07-17-2018 | 11:17 PM
  #95  
SomedayJ's Avatar
SomedayJ
Registered User
 
Joined: Jan 2017
Posts: 1,271
Likes: 333
Originally Posted by Charles4x4
Running into an issue with the Drivers Seat fabric tear. My local Trim Shop looked through 3 Detroit books, but no luck finding anything on '87 SR5 Gray Cloth. See attached pics of both the factory cloth and the "closest match" she could find.

I've searched Forum Classifieds and Ebay for replacements, but no luck so far. If we can find the specs on the material, she may be able to find some of it.

Any ideas?
Our 4Runners (Surf in the asian market) were assembled in Japan, I have a local friend living there, I asked him the same question last year, he searched for the supplier but he couldn't find the right cloth, he tried in a few car seat reupholstery shops but no luck. If you find something, I'm interested also.
What you can do is buy a 4Runner passenger's seat, they are in good/better shape than the other one (usuallly), then install that cloth in your driver's seat.
Reply Like
Old 07-18-2018 | 11:42 PM
  #96  
SomedayJ's Avatar
SomedayJ
Registered User
 
Joined: Jan 2017
Posts: 1,271
Likes: 333
Originally Posted by Charles4x4
The 4Runner is at the paint shop and ready for transformation. I really hope the Brown metallic comes out great. I won’t have many updates for the next few weeks while we wait for it to be complete.
Are they going to paint the engine bay also?
Reply Like
Old 07-19-2018 | 05:12 AM
  #97  
Charles4x4's Avatar
Charles4x4
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 487
Likes: 17
From: Birmingham, AL
Originally Posted by SomedayJ
Are they going to paint the engine bay also?
No, it just wasn’t feasible to paint the engine bay as well. They’ll stop below the fender line. Since it’s black, it should look really good with a clean black engine bay!
Reply Like
Old 07-19-2018 | 01:49 PM
  #98  
Discombobulated's Avatar
Discombobulated
Registered User
 
Joined: Oct 2011
Posts: 2,377
Likes: 257
From: Denver CO
Originally Posted by Charles4x4

No, it just wasn’t feasible to paint the engine bay as well. They’ll stop below the fender line. Since it’s black, it should look really good with a clean black engine bay!
yea that’s a good bonus with any black car, I’m hosed with the red.....

did you get anymore info on your seats yet?
Reply Like
Old 07-19-2018 | 01:52 PM
  #99  
Charles4x4's Avatar
Charles4x4
Thread Starter
Registered User
 
Joined: Apr 2017
Posts: 487
Likes: 17
From: Birmingham, AL
Originally Posted by Discombobulated


yea that’s a good bonus with any black car, I’m hosed with the red.....

did you get anymore info on your seats yet?
Yes, I got lucky - found a guy via Craigs List with 3 1st gens in a barn in Indiana! He is shipping me the substitute material today, along with 4-5 other small parts I was missing.

He usually sells local only, but I convinced him to ship these to me. Great guy, but a bit old school (doesn't have PayPal, etc) so I had to do old school verification of purchase.

Fingers crossed everything comes in early next week in good shape.
Reply Like
Old 07-19-2018 | 06:17 PM
  #100  
Discombobulated's Avatar
Discombobulated
Registered User
 
Joined: Oct 2011
Posts: 2,377
Likes: 257
From: Denver CO
Excellent this is gonna be amazing when you’re done.....and I will be jelly!!!
Reply Like



Advanced Search

All times are GMT -8. The time now is 07:41 PM.