86 4runner break / rotor job *help*
#1
Registered User
Thread Starter
Join Date: Dec 2009
Location: Haiku, Hawaii
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
86 4runner break / rotor job *help*
Started a break job on my 86 4Runner...not going so well...
--six lug rotors, front disk breaks, M/T alcoa auto-locking 4x4
Rotors were shot, so it's more than just the disk breaks that need replacing.
I ran into troubles right now getting everything off so that I can take off the old rotors.
-Calipers are hanging and off
-took the hub cap off and most of the internal pieces...already got most springs and pressure clamps off...down to a large silver circle cap and the internal bronze...don't have the tool or the know to get this off / rotor off.
Anyone changed this kind of autolock, etc.??
I can upload pictures tomorrow no problem, I thought this was going to be alot quicker and less painful.
Good fun so far though.
Thanks much
--six lug rotors, front disk breaks, M/T alcoa auto-locking 4x4
Rotors were shot, so it's more than just the disk breaks that need replacing.
I ran into troubles right now getting everything off so that I can take off the old rotors.
-Calipers are hanging and off
-took the hub cap off and most of the internal pieces...already got most springs and pressure clamps off...down to a large silver circle cap and the internal bronze...don't have the tool or the know to get this off / rotor off.
Anyone changed this kind of autolock, etc.??
I can upload pictures tomorrow no problem, I thought this was going to be alot quicker and less painful.
Good fun so far though.
Thanks much
Thread
Thread Starter
Forum
Replies
Last Post
6th Gear
84-85 Trucks & 4Runners (Build-Up Section)
19
12-10-2019 07:31 AM
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
19
05-02-2016 09:10 PM