3.0l Improvement
#61
Registered User
Join Date: May 2007
Location: Shoreline, Wa
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts
#63
Registered User
Thread Starter
Join Date: Sep 2008
Location: Northern California
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Here is what I have for pics
I have some pics of the dyno readings. The graph is hard to read being the gap in between number. Go to this link to look at pics. The number I gave you are real the print outs I have to wait for but look at the pics.
http://www.myspace.com/jandjcustomperformance
http://www.myspace.com/jandjcustomperformance
#70
Registered User
Thread Starter
Join Date: Sep 2008
Location: Northern California
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
A Stock 3.0 Comes With 135hp At The Engine And Roughly 101 At The Rear Wheels. So I Dont Know Were You You Are Getting They Come With 80 Less That Would Put The 3.0 Coming With 180 Hp And We All Know That Is Not True. Are You Thinking The 3.4l.
#75
Registered User
Join Date: May 2007
Location: Shoreline, Wa
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts
those are the #'s . those are the #'s from toyota as they rated to motor.
consumer reports says 150 horsepower @4800 and 180 torque @3400 .
http://consumerguideauto.howstuffwor...-4runner-4.htm
consumer reports says 150 horsepower @4800 and 180 torque @3400 .
http://consumerguideauto.howstuffwor...-4runner-4.htm
Last edited by Alex 400; 10-02-2008 at 08:28 PM.
#77
Registered User
Join Date: May 2007
Location: Shoreline, Wa
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts
#80
Registered User
Thread Starter
Join Date: Sep 2008
Location: Northern California
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
I spoke to the dyno owner this morning and he said on the YQ number I must take 25% off of them to make them legit TQ numbers. He figured I just assumed that yesterday.