3.0 Low Idle When Stationary
#21
Registered User
Join Date: Feb 2010
Location: willits
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
if you leave your TPS disconnected, your mileage is going to be bad and your check engine light is going to be on....check the ohms on your tps to see if you need to adjusted or replace it....i'm having the same problem with my tps, thats why I couldnt pass my smog test...
#22
Registered User
Thread Starter
Join Date: Dec 2009
Location: Pearland, Tx
Posts: 754
Likes: 0
Received 0 Likes
on
0 Posts
mine just started doing it. i didnt pass smog a while back due to my blown head gasket. after that it passed. do i check the ohms with the motor running? what should it read?
#23
Registered User
Join Date: Feb 2010
Location: willits
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
no, you need to take off the body throttle off from the engine, there's a link to download the manual for this truck here at yotatech. is one the is stinky, on top of the list of tread....
#24
Registered User
Thread Starter
Join Date: Dec 2009
Location: Pearland, Tx
Posts: 754
Likes: 0
Received 0 Likes
on
0 Posts
is there a way to keep all of the coolant from pouring out of those hoses attached to the throttle body?or a way to do it on the truck so that i dont have to fool with those
Last edited by 95blackToy; 07-07-2010 at 06:20 PM.
#25
Registered User
Join Date: Feb 2010
Location: willits
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
what I would do is find some bolts with the same diameter of the hose...take off the hose from the throttle body and put the bolt on the hose and used the some hose clamp.
#28
Registered User
#29
Contributing Member
Join Date: Jul 2003
Location: Orlando, FL
Posts: 9,076
Likes: 0
Received 0 Likes
on
0 Posts
I changed the name of your thread by the way - the other one was way too ambiguous.
If you don't like this one then give me another more descriptive one and I'll change it for you.
I'm going to unsubscribe to this thread so just shoot me a PM with it.
Fink
If you don't like this one then give me another more descriptive one and I'll change it for you.
I'm going to unsubscribe to this thread so just shoot me a PM with it.
Fink
Last edited by Fink; 07-08-2010 at 06:27 AM.
#30
Registered User
Thread Starter
Join Date: Dec 2009
Location: Pearland, Tx
Posts: 754
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, i am in the process of checking my tps. When i do the resistance check they all seem to be within standard. Accept from terminal IDL-E2 isn't even getting a reading. could this mean i need a new tps? Here is a link to the test. http://www.the-roo.com/4runner/Engin...m/throttle.pdf.It would seem that there is something wrong with the IDL terminal.
Last edited by 95blackToy; 07-09-2010 at 01:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post