3.0 how bad is it really?
#1
Registered User
Thread Starter
3.0 how bad is it really?
just a ? on the 3.0. If it is really maintained, I mean babyed, what are the chances of burnet valves and blowen H.G's. and how meny miles will this motor really last?
#2
Registered User
Join Date: Dec 2005
Location: Phoenix, AZ
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
They last 100s of 1000s of miles. I think the 3.0 get a bad rap. I have had very few problems with mine. I don't see why people think changing a headgasket would be a big deal. I've changed many headgaskets for friends with 22Rs, but none of them complain that the 22R is crap because it blew a head gasket.
#3
I agree. Despite all the whining that goes on, they last for a hell of a long time, especially c/w many others. Good reality is: reliable, low maintainence, can take a lot of abuse. Bad part is: low HP considering size of engine, and minimal aftermarket mods available. Head gasket wise-- they WILL go, regardless of how well you take care of them, hence the recall.
#4
Registered User
Thread Starter
I agree. Despite all the whining that goes on, they last for a hell of a long time, especially c/w many others. Good reality is: reliable, low maintainence, can take a lot of abuse. Bad part is: low HP considering size of engine, and minimal aftermarket mods available. Head gasket wise-- they WILL go, regardless of how well you take care of them, hence the recall.
#5
Registered User
Join Date: Oct 2007
Location: Lexington, SC
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
My 3.0 lasted a long time for me, 236,000 miles before i sold the truck. Good motor. Only other issue to go along with what is stated is the milage. It doesnt get the greatest. But it is a good motor, jsut make sure it is in front of a manual tranny, it makes it a bit better.
#6
They aren't as bad as it seems. But when an issue does arise it's very difficult to work on compared to the 22r series.
Personally my friends both have the 3.0 and beat the hell out of them whenever they can. Both have been overheated numerous times and ran hard and they are still running smooth. One has 150k and the other just went over 200k
Personally my friends both have the 3.0 and beat the hell out of them whenever they can. Both have been overheated numerous times and ran hard and they are still running smooth. One has 150k and the other just went over 200k
#7
Contributing Member
I hate my 3.0 but then again I rode Tippy hard with 35's and 5.71's. I think That's what did the HG in even with a HG replacement 20K ago. I have a 3.4 sitting in the garage. I can't wait. But that's just me.....
Trending Topics
#8
Registered User
Join Date: Sep 2007
Location: Puyallup, WA
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
There are better engines - but I love the 3.0. It's very weak for it's size - yes, but the 22RE is even weaker. Every engine has its problems, and I'm on 180,000 with minor ones so far. Replaced my HG and had a bunch of other crap done at the same time. It runs very well and is very reliable on and off road. The 3.4 is better, but I don't know where all the hate for the 3.0 comes from.
#9
Contributing Member
They last 100s of 1000s of miles. I think the 3.0 get a bad rap. I have had very few problems with mine. I don't see why people think changing a headgasket would be a big deal. I've changed many headgaskets for friends with 22Rs, but none of them complain that the 22R is crap because it blew a head gasket.
#12
Registered User
Join Date: Apr 2007
Location: Valencia, California
Posts: 1,301
Likes: 0
Received 3 Likes
on
3 Posts
As far as the 3.0 I have heard many things about it that I agree with.
The 3.0 is heavy and slow, yes.
The 3.4 is lighter, and has more HP, yes...
Bad Gas mileage, HG failure, and cramps the engine bay with harder than hell spark plug replacement.
But one thing for sure is, it is a Toyota engine. We should back it up and with all its flaws, it will still start up for me every day. Even with 193k miles, it is still running strong. You can't beat it in terms of reliablility, only match it.
Even when I do eventually swap for a 3.4, I will still not diss my old engine that brought me to where I am now.
Just some advice, is not not sink too much cash into it. No braided steel lines, or advanced equipment. Just put good oil's and filters and you will be golden.
#14
Registered User
Join Date: Mar 2008
Location: Nelson/Kelowna BC, Saskatoon SK Canada
Posts: 316
Likes: 0
Received 1 Like
on
1 Post
I have an 89 and it has been in my family since February of 89. There have never been any significant issues with the engine at all, and yes for many people it has its fair share of problems, but i personally don't see any issue with it.
#15
Registered User
Join Date: May 2007
Location: Shoreline, Wa
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts
mine has had no major problems in the time that i have had it and as far as i know there wasn't any previous work done except for the timing belt. i change the oil every 6000 miles (mobil 1 synthetic and a filter change at 3000) this next year i will be doing a lot of freeway driving and snow driving, and i will go back to a 3000 mile oil change. I feel totally comfortable driving long distances without worrying about the engine. It makes enough power, not a lot, but enough. and i trust it off road. never stumbled on me, never left me hangin'. i wish it got better gas milage but it's is not as bad as many of my friends rigs 155,XXX miles and counting
that being said, if it blows, in comes 3.4 ahaha
that being said, if it blows, in comes 3.4 ahaha
Last edited by Alex 400; 05-09-2008 at 09:25 AM.
#17
They last 100s of 1000s of miles. I think the 3.0 get a bad rap. I have had very few problems with mine. I don't see why people think changing a headgasket would be a big deal. I've changed many headgaskets for friends with 22Rs, but none of them complain that the 22R is crap because it blew a head gasket.
#18
Registered User
Join Date: Feb 2008
Location: the great Maine wilderness
Posts: 2,049
Likes: 0
Received 4 Likes
on
4 Posts
my 3.0 has 255+ miles on it...the hg's were done at 70k under recall, and havent had any major problems, it does eat gas and is weak for its size, but i have brought mine to the depths of hell and back again(chest deep water w/out a snorkel) several times, and it still WANTS to run... just keep fluids changed regularly and you'll be fine, and if the hg's go...its a day or 2 of work and if you do it right and have the heads shaved, it will prob run a few hundred k more
#19
Registered User
297,000 on my 89 3.0, hg's changed once by previous owner. It was an excellent engine. I hardly ever touched it.
This engine has 150,000 miles, hg's were done at 135,000 just before I bought it. Again, hardly ever touch the engine.
22RE's are too small for my tastes at least in a 4runner so I can't drive them regardless of ease of maintenance. Had I owned a pick up I might feel differently but then again the 3.0 in a pick up will be all the much faster.
Frank
This engine has 150,000 miles, hg's were done at 135,000 just before I bought it. Again, hardly ever touch the engine.
22RE's are too small for my tastes at least in a 4runner so I can't drive them regardless of ease of maintenance. Had I owned a pick up I might feel differently but then again the 3.0 in a pick up will be all the much faster.
Frank
#20
Registered User
Join Date: Oct 2006
Location: Some where in Utah
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
252,XXX miles on my 92 runner. Heads have been done once and I abuse the hell out of it. Starts every time. Put a high flow exaust system on it and get rid of the cross over pipe and you shouldn't have to worry about anything for awhile.