2wd p/u on 31's??
#81
Registered User
iTrader: (2)
It sounds like it might be worth it to me to email Total Chaos and ask them why the BL is required with LT, hoping it's not because of rubbing on the firewall. I'm going with the Batch Racing LT kit when I've got more of the other work my truck needs done on it actually completed.
e: Sorry about the threadjack, JoeC.
e: Sorry about the threadjack, JoeC.
#82
Registered User
Join Date: Oct 2009
Location: Downtown Heckronto, Ontario, Soviet Canuckistan
Posts: 1,499
Likes: 0
Received 1 Like
on
1 Post
I hate it when someone decides to cut and run, screwing over other folks in the process. Oh well, at least I know now, long before I was even gonna buy. At least the TC kit seems more complete anyways.
#83
Registered User
Join Date: Oct 2009
Location: San Diego, CA
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Relating back to the ride height question.
My 2wd lifted still sits atleast 3" lower than a stock 4wd. Factors may be that I run 30" tires instead of 31 and im SUA
My 2wd lifted still sits atleast 3" lower than a stock 4wd. Factors may be that I run 30" tires instead of 31 and im SUA
#84
Registered User
Join Date: Apr 2009
Location: Vancouver, WA
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
with a 3" body lift you do not sit 3" lower than a stock 4wd.. Just put it this way.. Stock tires for a 2wd are 195/50/15.. or something stupid like that A 4wd can fit 31x10.50x15 stock.. We need atleast a 3.5-4" lift to achieve that tire size
#85
Registered User
Join Date: Oct 2009
Location: San Diego, CA
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
It is an approximate measure taken by driving up to stop lights where I see 4x4's with 31" tires sitting next to me and they are much higher than me still. I am pretty sure I am that much shorter.
I am still the short guy on the road
I am still the short guy on the road
#86
Registered User
Join Date: Oct 2009
Location: Downtown Heckronto, Ontario, Soviet Canuckistan
Posts: 1,499
Likes: 0
Received 1 Like
on
1 Post
Got an email reply from Total Chaos saying I need to reread the product description under "parts not included" and quoted this section of it:
2" body lift is required for running 33s, not 31s with their uniball kit. Though they did not say why other than that I will need to change front fenders, which I was doing anyways for my snorkel.
84-88 Model Trucks require a 2" body lift to run a 33X10.5 tire.
Last edited by Magnusian; 09-04-2010 at 02:47 PM.
#88
Registered User
Join Date: Oct 2009
Location: Downtown Heckronto, Ontario, Soviet Canuckistan
Posts: 1,499
Likes: 0
Received 1 Like
on
1 Post
Yeah, that and the inner fender liners from what I've read. I guess a 2" smaller tyre wouldn't need the BL because it'd be far enough away from stuff. If not, will find out eventually!
Last edited by Magnusian; 09-04-2010 at 04:10 PM.
#89
Registered User
Join Date: Apr 2009
Location: Vancouver, WA
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
well i havent received any more parts yet.. I bought the upper arms and torsions from the same guy; but i have only received the upper arms.. Kinda getting worried..
Not sure when the shackles or tires will get here, or even the bushings.. lol
Not sure when the shackles or tires will get here, or even the bushings.. lol
#90
Registered User
Join Date: Apr 2009
Location: Vancouver, WA
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
torsions came in, bushings will be here tomorrow.. Tires had a shipping problem with the casings; so they said they will be shipped out wednesday the 15th.. And no clue about the shackles; kinda afraid to email and ask to be honest =X
#91
Registered User
iTrader: (2)
id call and ask and if it will take him more then a few days, cancel it and but these
http://www.dezertrangers.com/vb/part...ies/122847.htm
http://www.dezertrangers.com/vb/part...ies/122847.htm
#96
Registered User
Join Date: Aug 2010
Location: Oregon, USA
Posts: 2,027
Likes: 0
Received 0 Likes
on
0 Posts
#97
Registered User
Join Date: Apr 2009
Location: Vancouver, WA
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Nice. Well my shackles have shipped. I finished putting the 4wd fenders and corner lights in; and my bushings from total chaos arrived. Once the shackles come I will put all the suspension pieces on; and wait for the tires (which should ship next week)
#98
Registered User
Join Date: Dec 2009
Location: Sacramento
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
I have a 94 2wd DLX with a three inch performance accessories body lift. I fit 31's no problem after removing the front valence. Soon I hope to throw on an addicted offroad front bumper to cover the ugly gap and keep some bugs from hitting my radiator but other than that, nothing rubs, I might have banged on the fenders a little bit but I dont recall doing anything major.
If I recall the performance accesories body lift wasnt much, I think I got mine for like $125 back in the day including shipping but I just ran a quick google and found one for $136.
If I recall the performance accesories body lift wasnt much, I think I got mine for like $125 back in the day including shipping but I just ran a quick google and found one for $136.
#99
Registered User
Join Date: Apr 2009
Location: Vancouver, WA
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Yeah; im trying to avoid having a body lift as much as possible and stay with upgraded suspension but thats good news because you only have 3" of lift lol.. I think I plan on going with a 2" body lift in the future just for EXTRA clearance considering I do not want any rubbing. Maybe for christmas!
Oh btw.. picking up my $25 best friend hookup 4.30 LSD tomorrow
Oh btw.. picking up my $25 best friend hookup 4.30 LSD tomorrow
#100
Registered User
Join Date: Apr 2009
Location: Vancouver, WA
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Well; I went to my friends house and pulled the rear end.. Guess what? 4.30 OPEN diff! BLAH! I told him he should pay me for driving 30 minutes out to his house and pulling it myself; so he just gave it to me for free since he's scrapping the car.
I'm pretty effing broke; I think I am going to yank the 4.10 LSD out of my brothers supra since his project isn't done and a 7.5" LSD wont hold at 700rwhp any ways..
I'm pretty effing broke; I think I am going to yank the 4.10 LSD out of my brothers supra since his project isn't done and a 7.5" LSD wont hold at 700rwhp any ways..