91_4x4runner

Pardon me if I'm being an idiot, but would it be an easy/economical lift to put OME 901 coils and BJ spacers on my 91 4Runner for a cheap lift? How much do BJ Spacers cost anyways? Thanks, Eric

rocket

iTrader: (1)

Get option #2
https://www.yotatech.com/forums/showthread.php?t=54794
You'll want the shocks if your gonna lift it. BJ spacers by themselves are $109 from the same seller https://www.yotatech.com/forums/showthread.php?t=48819

leebee

try contacting strap22, sdori or 4crawler as a start. use the blinking yellow search button at the top of this page and type in the parts you mention.

lee

91_4x4runner

I just got new Rancho 5000 shocks on all corners, do I really need new shocks with these?

rocket

iTrader: (1)

Those should work just fine...although i've read and heard a lot of complaints about them being too stiff.

91_4x4runner

Actually, I like them just fine, I can take speed bumps at 30mph barely feeling it. And it isn't because they're shot. They give alot better ride than my moms 05 4Runner does where you can feel every little bump (in my opinion). They give a truck like ride, and I don't really want my 4R to drive like a car.

rocket

iTrader: (1)

So give strap22 a call and get yourself the 901 coils and BJ spacers. I'm sure you'll like both as many others do.

91_4x4runner

I'm pretty sure that with this setup, I can clear 33x12.5. Someone tell me if I'm wrong please? I realize that with 12.5, I'll prolly have a small bit of rubbing, but I still like the wider, more aggressive stance. I think I will give him a call soon as I get my money. Thanks, Eric

celica

you will also want to do a 1" body lift. Check out crawlers website for tire size/lift combos

91_4x4runner

Thanks celica, I was just going to do a 2" bl for a bit more aggressive stance.