YotaTech Forums - 22re started squealing, now no start

Page 2 of 2

Show 40 post(s) from this thread on one page

YotaTech Forums (https://www.yotatech.com/forums/)

- 86-95 Trucks & 4Runners (https://www.yotatech.com/forums/f116/)

- - 22re started squealing, now no start (https://www.yotatech.com/forums/f116/22re-started-squealing-now-no-start-165886/)

desconhecido

02-06-2009 10:39 AM

Quote:

Originally Posted by Humbleslc (Post 51051343)

Bought this at harbor freight for $6

Did it do the trick for you?

b/s rules

02-06-2009 10:46 AM

thats insane. i've only seen that happen in race cars, never in a yota. i have seen the flywheel break and come thru the floorboard in my buddy's monte carlo, but its 623horsepower!!

894x4pickup

02-06-2009 11:15 AM

Can you say "WOW"...?

Humbleslc

02-15-2009 08:57 AM

So I finally got it all back together, but the truck is still squelling, but when on load it doesnt but if you let go of the gas, the truck shutters and squeals again. Any suggestions?

abecedarian

02-15-2009 09:05 AM

did you replace the converter?
seems to me a broken flexplate would likely be caused by the converter or trans.

Humbleslc

02-15-2009 09:10 AM

Nope I did not replace anything but the flexplate.

Humbleslc

02-16-2009 11:37 AM

Should I pull the trans again and replace the Torque converter, or could it be another problem that I over looking?

All times are GMT -8. The time now is 07:27 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page