Right hub staying Locked!!!
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: Cleveland,Tn
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Right hub staying Locked!!!
Well I'm still working the bugs out of my 87' 4runner(sas'ed)
The right hub is staying locked in. Wheither the selector is on free or lock it stays locked. What could cause this? I'm still learning about the Solid front axle so any tips or advice would be apreciated. I have to replace my knuckle bearings here in a few days so I'd like to fix this while I'm at it.
Thanks!
The right hub is staying locked in. Wheither the selector is on free or lock it stays locked. What could cause this? I'm still learning about the Solid front axle so any tips or advice would be apreciated. I have to replace my knuckle bearings here in a few days so I'd like to fix this while I'm at it.
Thanks!
#4
Contributing Member
iTrader: (3)
Pull the hub off and clean/rebuild it. Likely has some dirt or too much grease inside making the locking gear stick or was assembled improperly:
http://www.4x4wire.com/toyota/mainte...d/hub_rebuild/
http://www.4x4wire.com/toyota/mainte...d/hub_rebuild/
#6
Pull the hub off and clean/rebuild it. Likely has some dirt or too much grease inside making the locking gear stick or was assembled improperly:
http://www.4x4wire.com/toyota/mainte...d/hub_rebuild/
http://www.4x4wire.com/toyota/mainte...d/hub_rebuild/
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: Aisin factory hubs, cleaned and lubed
carlspeed
Axles - Suspensions - Tires - Wheels
5
08-23-2015 02:59 PM
Athansinis
Hot Deals - Free Stuff - Craigslist
0
07-27-2015 08:38 AM
Steven.m.paulk
86-95 Trucks & 4Runners (Build-Up Section)
3
07-24-2015 01:44 PM