Pics of your 84/85 rig.
#1102
Registered User
iTrader: (1)
I know ive already posted pics of my truck on here, but could somebody tell me what kind of wheels I have? I made a topic in the wheels and tires section but cant really get any answers there. I like the looks of these wheels and i'd like to know who makes em and what they are called.
I would say take your pick. Various companies made that style or a close variation. American Racing and Enkei are some top companies. The other smaller companies were prob owned by one of these companies.
#1103
I have spent an hour looking at different websites that sell wheels and have not found any that are even close. I searched "85 toyota truck" on yahoo images and I found a couple different trucks with the exact same wheels as mine, but no info at all on em. Is it possible that these style wheels are not made anymore?
#1104
Registered User
Join Date: Mar 2009
Location: (LSD) Lower Slower Delaware
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
I know ive already posted pics of my truck on here, but could somebody tell me what kind of wheels I have? I made a topic in the wheels and tires section but cant really get any answers there. I like the looks of these wheels and i'd like to know who makes em and what they are called.
Pretty RED Toyota
#1105
Registered User
iTrader: (1)
I have spent an hour looking at different websites that sell wheels and have not found any that are even close. I searched "85 toyota truck" on yahoo images and I found a couple different trucks with the exact same wheels as mine, but no info at all on em. Is it possible that these style wheels are not made anymore?
I would almost guarantee that no one makes those anymore. That was a early to mid 90s wheel style. Nowadays everyone is going with giant wagon wheels...
Your best bet is to find some used, would be my guess.
#1106
Registered User
Join Date: Aug 2011
Location: Dallas, TX
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
#1107
Registered User
The race seats arent hard to install. I did the seats before joining yotatech so no pics or build up sorry hrt4me. The biggest pain in the ass was figuring out where to permantly place the drivers seat. I used 2x4's to hold up the seat while i sat in it and aligned it to my comfort. Then after that measured and cut 4 pieces of 1 1/2 " flat strap 2ifferent lengths (2 for the front and 2 for the back) then welded andle iron to each side and drilled bolted them in.
#1112
Registered User
Join Date: Aug 2011
Location: Dallas, TX
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
The race seats aren't hard to install. I did the seats before joining YotaTech, so no pics or build up, sorry hrt4me. The biggest pain in the ass was figuring out where to permanently place the drivers seat. I used 2x4s to hold up the seat while I sat in it and aligned it to my comfort. Then after that, I measured and cut 4 pieces of 1-1/2" flat strap 2 different lengths (2 for the front and 2 for the back), then welded angle iron to each side and drilled, bolted them in.
#1113
Registered User
Join Date: Sep 2011
Location: Las Cruces, NM
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
#1115
Registered User
Join Date: Aug 2010
Location: Sunshine Coast, Australia
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Sorry its taken me ages to reply, not been on here since. Spend most my time over on my build http://www.4wdaction.com.au/forum/vi...?f=22&t=104909
Bought the tray cover from Chap on Ebay local to here in Aus. He has made up a mold so makes them up himself. Needed a bit of finishing from me, isn't water tight and not a pro job, theres no rubbers around the edge (Easy fix) not markings or holes for hardware etc, however it is only ment to keep sticky fingers out of the back and keep most of the dirt off the stuff in there..
Ebay sellers user name is robo1971cannonball but he dosn't seem to have them listed any more.
Bought the tray cover from Chap on Ebay local to here in Aus. He has made up a mold so makes them up himself. Needed a bit of finishing from me, isn't water tight and not a pro job, theres no rubbers around the edge (Easy fix) not markings or holes for hardware etc, however it is only ment to keep sticky fingers out of the back and keep most of the dirt off the stuff in there..
Ebay sellers user name is robo1971cannonball but he dosn't seem to have them listed any more.
#1119
Registered User
an updated pict of the one i have. link to build
https://www.yotatech.com/forums/f115...ee-toy-147609/
https://www.yotatech.com/forums/f115...ee-toy-147609/