Need new flexy front springs... HELP!
#1
Registered User
Thread Starter
Need new flexy front springs... HELP!
Okay, I have no idea what springs are currently on the front, but they are way to stiff... (was going to put a 350 in her)
So I have chevy 64" springs in the back... and I can always build bigger shackles..
I have 34/10.5 up front and 33/12.5 in the back... If you can seen the pic is got no front bumper and took a hammer to the other side of the wheel well.
Okay, so the big question, what springs and how much lift.... yes I've read the forms... and from the what I've found I'm thinking some marlin craw springs....
So the important part... cause I want flex... not just to fit... how big of lift should I go with....
I like the height im at, dont want to be to top heavy. and I probably wont put anything bigger then 35"s
So marlin crawl ?
how many inches?
And is there a local kansas city, mo place to buy?
or just pay to ship??
So I have chevy 64" springs in the back... and I can always build bigger shackles..
I have 34/10.5 up front and 33/12.5 in the back... If you can seen the pic is got no front bumper and took a hammer to the other side of the wheel well.
Okay, so the big question, what springs and how much lift.... yes I've read the forms... and from the what I've found I'm thinking some marlin craw springs....
So the important part... cause I want flex... not just to fit... how big of lift should I go with....
I like the height im at, dont want to be to top heavy. and I probably wont put anything bigger then 35"s
So marlin crawl ?
how many inches?
And is there a local kansas city, mo place to buy?
or just pay to ship??
#4
Registered User
iTrader: (1)
I think marlin is out of the spring game. Allpro and Trailgear, I've seen post of guys talking about deaver but there not listed on website. I'd guess 4" would fit your purpose. I'm SAS'd with 4" allpro springs but my set up sits high than what yours will because of frame differences. Pretty sure you're gonna need to go high steer and need new front spring hangar.
#5
Registered User
Thread Starter
Ive heard bad things about trail gears leaf springs... (GOOD for street)
All pro is looking better these days.... wondering if I can buy them local.
I was wondering about the 4"... it just seems to spend that much money you might as well go big.... But I like that my truck still fits places....
So 4" you think?
Thx for the reply too...
Side note... is their any thing that can be done to hold your axle in place other then that little pin in the middle of the spring??
All pro is looking better these days.... wondering if I can buy them local.
I was wondering about the 4"... it just seems to spend that much money you might as well go big.... But I like that my truck still fits places....
So 4" you think?
Thx for the reply too...
Side note... is their any thing that can be done to hold your axle in place other then that little pin in the middle of the spring??
#7
Registered User
Thread Starter
Maybe not a common problem?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
2
08-11-2015 01:56 AM
coffey50
Offroad Tech
17
07-28-2015 10:55 AM
Steven.m.paulk
86-95 Trucks & 4Runners (Build-Up Section)
3
07-24-2015 01:44 PM