85 pickup drum backing plate
#1
85 pickup drum backing plate
So, I bent the backing plate for one of my drums while attempting to pound a bearing out (lesson learned). I think it might be able to be straightened, but would rather just buy a new one. My problem is that everywhere I go for a compatible backing plate shows me one that looks like a later '80's backing plate. Mine is definitely different. It has a post at the top above the cylinder. What toyotapartsdeal.com sent me looks like a later model. Can I still use it? I'm kind of lost on what parts I'll need to make it work. They sent me part number 47043-35150, but my actual passenger side backing plate looks more like a passenger side version of 47044-35110.
What I have: (it is upside down, but notice the pin in the bottom of the picture, which is actually above the brake cylinder)
What they sent me:
What I have: (it is upside down, but notice the pin in the bottom of the picture, which is actually above the brake cylinder)
What they sent me:
#3
Unfortunately, it was bent the other direction (towards the shaft on both outer sides of the plate). I was able to pick one up at a Yota junk yard at lunch today, so I'm back in business. I wish I had gone there in the first place....I was able to pick up a taillight lens while I was at it.
The following users liked this post:
old87yota (10-27-2019)
Thread
Thread Starter
Forum
Replies
Last Post
v8sport4runner
General Vehicle Related Topics (Non Year Related)
13
03-02-2012 11:07 AM
Mohamed
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
6
06-14-2004 06:39 AM