Transfer case issue
#1
Registered User
Thread Starter
Transfer case issue
First off I got to take my transfer case off for the frist time. didnt do it by the manual as in take the whole transmission off. well I took it off and it wouldnt come off I had it in neutral. So I popped it into 4h and it fell right off. I got a transfer case from the junkyard for 75., and It is setup for the shifter to go right in the top, well mine is setup were the shifting rods are out like 5 inchs from the transfer case. only differance from the 2 is the front drive shaft is a circle instead of a square. Im waiting on another transfer case a 85 to see if that one matches, ok the funny thing this is all being done to have a working speedometer cause mine will eat the gear not spin it. any suggestions on the year of the transfer case?
Last edited by Scooby098; 05-07-2009 at 05:53 PM.
#4
Registered User
Join Date: Aug 2008
Location: Columbus Georgia
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
#6
Registered User
Thread Starter
soo update its the tranfer case is the same... so would anyone know what im talking about the shifting rods being out that far and what year tranfercase that came in?>
Thread
Thread Starter
Forum
Replies
Last Post
mYnAmEiSmUd
95.5-2004 Tacomas & 96-2002 4Runners
2
07-20-2015 06:48 AM
crashburnoveride
86-95 Trucks & 4Runners
1
07-10-2015 06:39 AM