Ring and Pinion Swap
#1
Ring and Pinion Swap
I'm thinking of swaping out my stock ring and pinion on my '83 yota to 4.88's. I have 33 x 1250s and from what I've read 4.88's are recommended. I also have an Aussie Locker in the rear (love it!). With regearing I may even get to use 5th gear once in a while. Any input would be helpful!!
#3
4.88's w/ 33's are a great match but if you are thinking of ever going with a bigger tire easier to regear for that now...5.29's for 35's.
If you want to do it yourself you might find Zuk's website helpful: GearInstalls.com
Good to hear about the Aussie, I have mine out in the garage ready to go in
If you want to do it yourself you might find Zuk's website helpful: GearInstalls.com
Good to hear about the Aussie, I have mine out in the garage ready to go in
#4
4.88's w/ 33's are a great match but if you are thinking of ever going with a bigger tire easier to regear for that now...5.29's for 35's.
If you want to do it yourself you might find Zuk's website helpful: GearInstalls.com
Good to hear about the Aussie, I have mine out in the garage ready to go in
If you want to do it yourself you might find Zuk's website helpful: GearInstalls.com
Good to hear about the Aussie, I have mine out in the garage ready to go in
#6
4.88's it is (front and rear of course). No plans to go bigger than 33's. After the ring and pinion swap it's an Aussie locker for the front. Hopefully a test and Moab East Jeep Safari this year and show those boys what a Yota can do.
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
07-14-2020 08:35 PM
kirkrunner
86-95 Trucks & 4Runners
2
07-27-2015 07:59 PM