3rd Gen SAS & Leaf Conversion Done
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: Thornton, Colorado
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
3rd Gen SAS & Leaf Conversion Done
I have just about finished up my SAS. I am getting some bump steer I think because it is a little too high. I think I'm going to switch the front springs to drop it about 3". Here are some pics. I also need to find a place to flex it out better.
Rancho 44044 Front
Chevy 63's Rear
37x12.50 MTR
The pics aren't showing up. Here's a linkPics
Rancho 44044 Front
Chevy 63's Rear
37x12.50 MTR
The pics aren't showing up. Here's a linkPics
Last edited by cubuff4runner; 05-30-2005 at 08:14 PM.
#4
Registered User
Thread Starter
Join Date: Oct 2003
Location: Thornton, Colorado
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
I took it to an alignment shop and everything is good.
Left 5.40 caster
Right 5.43 caster
And on the Dana 44 you can't adjust camber.
After I get it a little lower I should be at about 4 deg caster.
Left 5.40 caster
Right 5.43 caster
And on the Dana 44 you can't adjust camber.
After I get it a little lower I should be at about 4 deg caster.
#5
Registered User
Thread Starter
Join Date: Oct 2003
Location: Thornton, Colorado
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by data
very nice!!!!! PM sent
Did you just do that over the weekend?
Did you just do that over the weekend?
I also had all the parts fabed up and axle built before I started, making the process much quicker.
Trending Topics
#9
Registered User
Thread Starter
Join Date: Oct 2003
Location: Thornton, Colorado
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jared Ajlouny
AWESOME!!!!! the rear didnt flex much in those pics, what setup are you running
#10
Registered User
Thread Starter
Join Date: Oct 2003
Location: Thornton, Colorado
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Cebby
Was this pic before the alignment? Those front wheels look a bit out of whack...
#15
Registered User
Looks good, makes my truck look like a low rider though
The 4Runner drives great, rides smooth, and looks like it came from the factory with the leaf springs. He did a great job on the swap and should be run to take out and test on some real rocks.
The 4Runner drives great, rides smooth, and looks like it came from the factory with the leaf springs. He did a great job on the swap and should be run to take out and test on some real rocks.
#16
Registered User
Thread Starter
Join Date: Oct 2003
Location: Thornton, Colorado
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Volcom
Looks good, makes my truck look like a low rider though
The 4Runner drives great, rides smooth, and looks like it came from the factory with the leaf springs. He did a great job on the swap and should be run to take out and test on some real rocks.
The 4Runner drives great, rides smooth, and looks like it came from the factory with the leaf springs. He did a great job on the swap and should be run to take out and test on some real rocks.
#18
Originally Posted by cubuff4runner
Aaron, Found out my check engine light was from a faulty speed sensor. My grandpa took it in today and had the tires balanced and said it's driving great. Now I have to wait 2 weeks to drive it
No one in my family can even get in mine w/o a boost!
#19
Registered User
Thread Starter
Join Date: Oct 2003
Location: Thornton, Colorado
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
I wish I could have seen him trying to get in. He's in pretty good shape and adventerous, he went sky diving for his 70th birthday a couple of years ago. I think he enjoyed driving it more than I thought he would. He helped out every day with the swap I figured the least I could do is let him drive it.
#20
Originally Posted by cubuff4runner
I wish I could have seen him trying to get in. He's in pretty good shape and adventerous, he went sky diving for his 70th birthday a couple of years ago. I think he enjoyed driving it more than I thought he would. He helped out every day with the swap I figured the least I could do is let him drive it.
It would be awesome if you had gotten some pics of him driving it!
Looks good. Looks real good.