Hey Tpotter, The truck had 33 inch tires on it. The torsion bars were cranked up and that gave it about a 1.5 inch lift in the front. Nothing was done to the back. With the torsion bars cranked up, it rode very rough. So he decided he wanted to go with a Superlift kit. That was a 4 inch lift . it comes with 4 inch blocks for the rear but he went with a 2 inch block to keep the truck level. He also installed a 1.5 inch spacer lift in the front giving it a total of 5.5 inch in the front. We cranked the torsion bars back down to help the truck ride softer. So I do not recommend to crank torsion bars up. If you want to have a little lift go with the ball joint spacer lift. front end needs re-aligned. The 4 inch lift was bought on ebay for around $650 and we installed it ourselves but took a day and a half. ran into frozen bolts on the lower control arms and we had to cut them off and take them to a shop to have new bushings pressed in. Looking at $2000 to have a shop install it.